Right now its red. Not sure what color I would change it to

 

Not what most people would consider aggressive...

But which sedan do you know that stretches 295s?

 

thats a very nice rear end !!!!

 

hey Johnny, whats your setup? are the rear fenders rolled flat, cut, what?

 

what color is the car? Deep purple metallic on the bbk to match the lips would be sweet. Just finish my headlights first

Good lord

 

https://g35driver.com/forums/media-s...thread-12.html <----- johnny's

 

Looks awesome Aaron.

 

Thxs snoop.

Just in case u didn't feel like digging through the post the rears are rolled flat with a slight pull and fronts screws have been taking out and fenders rolled. Wished I didn't roll the front. I was at a +4 on a 9" wheel and still need another 5 mm to b flush up front.

I have a Eastwood roller and could do urs for free next rime ur up here. That's if u haven't rolled them already.

 

im just curious johnny .. all this talk and reading on front rolled ... i know with my new set up going on soon with my 20mm spacers i have to take the screw and clip off the side of the fender .. can someone take a picture or explain a front roll cause i know the front fenders are not the same as the rear ... same goes with a pinch . marcus was talking to me bout that and it went over my head ...

 

The front fenders are very thin metal so when you roll them, if you're not careful, they pull very very easily. So pinching them just "rolls" them flat without the pull.

 

Front roll is the same as rear actually easier IMO just gotta take ur time and go easy on it cause thinner and moves outward easier. Not sure what u mean by a pinch. Maybe Marcus is referring to a tool called fender finisher. I could see how one would use that to pinch the front fenders. Do a google image search on fender finisher and see if that helps clarify things.

 

Ha nice to know that grant and I think a like. Grant is so wise...

 

The fender finisher is exactly what they're referring to. It's a little easier to roll the fronts with that and not get a pull than an actual roller.

 

if i don't have my fenders either rolled or cut by IA11, I will definitely take you up on that offer!!

not too sure about that fender finisher.. looks like you could pull a fender by accident.

 

Yes, Shane used a fender finisher to pinch my fronts flat. We also did a bit of a phonebook pull.