OFFICIAL: Aggressive Wheel fitment FLUSH/STRETCH sedan
#3061
ill Sedan
iTrader: (87)
#3065
ill Sedan
iTrader: (87)
#3067
ill Sedan
iTrader: (87)
#3070
#3071
Be careful backing down steep driveways boys, the infamous reverse fender pull finally got me after months of backing down my driveway!!!
I dont have a picture of when it actually happened cause i was on my way to work. I had to get the heat gun out real quick and roll it back out then i covered it up with a sticker so the paint wouldn't peel over the entire fender. I'll probably just end up sticker bombing the edge of the fender, i dont want to pay $2xx to have it repainted just to have it happen again!
I dont have a picture of when it actually happened cause i was on my way to work. I had to get the heat gun out real quick and roll it back out then i covered it up with a sticker so the paint wouldn't peel over the entire fender. I'll probably just end up sticker bombing the edge of the fender, i dont want to pay $2xx to have it repainted just to have it happen again!
#3074
wheels are VOLK RE30's specs are 19x10 +10(small spacer), 235/35 front and 19x11 +25, 245/35 rear. camber is -2.5 front and -3 rear(stock arms). fenders rolled flat in rear, fender liner screws removed and tabs rolled in front(no rubbing). rear fender from ground height is 25" front is about 25 1/8"
plans to go lower soon and possibly a proper shoot bare with me i just got the car around christmas.
plans to go lower soon and possibly a proper shoot bare with me i just got the car around christmas.