OFFICIAL: Aggressive Wheel fitment FLUSH/STRETCH sedan
#3902
#3904
#3905
20 offset all around..8.5 and 9.5.
I need to change out the rear tires they are 40s and thinking of going to a 30 while getting some camber. once I get the camber arms,coils and going lower.
#3906
ill Sedan
iTrader: (87)
#3907
looking good though.
I ran 40 series tires and swapped them for 35s due to rub in the rear with passenger. Now it is all good. I had 4 big people in the car the other day (looked like i'm dumped from the side) and no issues with a little camber.
#3908
looking goood man. I got the same set up and was told that I cannot play with the big boys
looking good though.
I ran 40 series tires and swapped them for 35s due to rub in the rear with passenger. Now it is all good. I had 4 big people in the car the other day (looked like i'm dumped from the side) and no issues with a little camber.
looking good though.
I ran 40 series tires and swapped them for 35s due to rub in the rear with passenger. Now it is all good. I had 4 big people in the car the other day (looked like i'm dumped from the side) and no issues with a little camber.
I miss driving my car long distance, first because I had to replace the motor and now that I have the new motor I can't because of rubbing.
Marcus, do you think that once I get the smaller profiles will I still have to get camber dialed in?(so I can purchase the rear camber arms and such) It will take me a month or 2 to get my coils.
#3914
who says i need coilovers... got bored at work
took a friends 08 350Z oem struts and cut 1.25" from the stem. used low heat for the reweld with compressed air and water to keep temps down(didn't have any problems). should be an automatic 1.25" drop, with the tanabe nf210 for a Z(1.2 drop, 2.2 on sedan) should be a total drop of 3.5" i will keep you guys posted cuz he wants to try them out on his Z first
took a friends 08 350Z oem struts and cut 1.25" from the stem. used low heat for the reweld with compressed air and water to keep temps down(didn't have any problems). should be an automatic 1.25" drop, with the tanabe nf210 for a Z(1.2 drop, 2.2 on sedan) should be a total drop of 3.5" i will keep you guys posted cuz he wants to try them out on his Z first
#3915