OFFICIAL: Aggressive Wheel fitment FLUSH/STRETCH sedan
#4531
Driver side rear sits lower then passenger so If I max out the passenger rear gotta leave few threads on the driverside.
i dont think i pulled my fenders much, but i rolled them flat.
#4532
ill Sedan
iTrader: (87)
#4534
ill Sedan
iTrader: (87)
#4535
yea lol. that pix was before I maxed out the rears. And when I first lowered it on them evenly on both sides.. Passenger rear sat higher. From that same day I have pix from driver side which sat lower.
From sitting higher I guess doesnt show camber much.
I have No idea What my rear camber #s are, Its all natural camber from the drop.
I should be installing my camber kit soon.
From sitting higher I guess doesnt show camber much.
I have No idea What my rear camber #s are, Its all natural camber from the drop.
I should be installing my camber kit soon.
#4536
#4537
ill Sedan
iTrader: (87)
#4538
#4540
#4542
ill Sedan
iTrader: (87)
Its closer to 5mm than 10mm, for every degree of camber.
#4543
245/275
Only difference I have from most is, its X, so awd sat higher then rwd stock...
But im on coils. dont know if it'll still effect it cause, Im bringing the body to the same low from higher travel...
#4545
you had asked me for a side shot. i remembered today. lol
i will get spacers for the fronts soon.
sorry about the open trunk n hood, Just changed out my destroyed axle.
i will get spacers for the fronts soon.
sorry about the open trunk n hood, Just changed out my destroyed axle.
Last edited by iiiiiekoiiiii; 09-23-2011 at 03:23 AM.