What type of fender work are you looking at doing, flat roll or a slight pull? How much camber do you want to run? Front and rear camber kits?

 

my fenders are cut in the rear .. if you look a few pages back i posted a picture of the rear fender ...

I'm looking to run around -3 since thats around what i am now and i love it but i want to go around 3'' drop and with natural camber i will be around id say -3.3 around ...

my front with natural camber is around -2.0 and going 3'' will id say around -2.5 which is fine with me

i don't have a camber kit front nor the rear .. im trying to pull all this off without spending an every 500 for camber kits

 

I would say that you could do 8.5 +10 / 9.5 +15 given that info. You could go down to 8.5 +5 in the front but you would need to "pinch" and flare the front a bit. I would highly suggest getting a rear camber kit (SPC/Eibach kit goes for like $160 or so) so that you can adjust the rear camber slightly as needed (don't wan't to rub with cut fenders fo sure) and adjust your toe, thus extending the life of your tires.

 

not may people around here do flaring/pulling ...

with my 2.5 drop now my toe and caster is within spec ... ok then ill go ahead and buy a rear camber kit then within the week or may order it with the coils ...

anyway i can roll a little bit of the rear fenders even tho i cut them ?? like a slight roll just in case i rub ??

 

Yeah since you don't want to "go crazy" I would stay away from flaring and pulling. With a 3" drop your toe definitely will not be in spec.

I ordered my BC coils with an SPC camber kit from a vendor on my350z.com and saved money by buying the package deal.

Depending on how much the fender is cut you may be able to roll what is left back some, but from what I understand if there isn't much left you can't really roll it.

 

dayum!!! marcus, i just saw all the new pics; looks tight man; perfecto!!

and johnny, looking sick as always bro

 

how much was it if you don't min d me asking .. from a local guy I'm getting the BC coils for 900+tax ... maybe a can wheel and deal with him to throw in some spc rear camber in there :-)

anything wrong with the ichiba rear camber with toe bolt ??

 

IIRC it was ~$1050 shipped (no tax for me since it was coming from out of state). Ichiba rear camber kit will work (I assume it includes toe bolts as well), haven't heard anything negative about it that I can remember.

 

ok so this is what i already ordered and picking up friday
jwt pop charger
z tube

next week or two I'm ordering
bc coils
spc rear camber

then a month or two after my new born is here "july 19th"
general tires 225/35 and 235/35
and spacers

wheel specs F - +10 ....R - +15 maybe lower if i can find someone good at pulling

the baby will be here by the time i order alot of this but i probably wont have a lot of time to get around to put this on. but ill have it all for a nice rainy day and when the baby is sleeping

then im done for a while ill be strapped with some cash ... then bonus for christmas .. i don't know yet but it will be nice :-)

 

Congrats on the upcoming birth your baby. My son is due on 20 July.

 

congratulations to you to as well buddy ... I'm having a little girl

see we both are trying to get the car done fast with the setups before the baby comes out ...

 

Hellaflush Approved

http://fatlace.com/hellaflush/g-sedan/

 

good job marcus

and thanks again for helping me on my new set up ... i will have the whole car done within a few months ..

 

Word congrats Marcus. Wish I was hf approved :-(

 

congrats marcus! doesnt it feel good hahaha