jlines sdmrl2

 

I dig. Though steps lips are FTW....

 

How bout....na nevermind. You'll see what I got planned for mines.

 

those forgestar are not a true 3 piece. Actually the lips are the same size no matter what the offset is. This is what I have been told.

 

Nice style but they are going to look tiny. That face style has so much room between the end of the spokes and the barrel that it makes them look a lot smaller than they are.

 

what size tires you folks prefer for 18x8.5 front and 18x10 rear...thanks!

 

215/35/18
245/35/18

 

how would 225/35 235/35 look? fronts gonna be fatter, im guessing because its only a 8.5?

 

current height

 

btw and the offsets fronts +30 rear+25
i know weak -_-

 

Yea that works as well, if u are going for a little stretch, i would go 215s or 205s even but u will have to add spacers. If u arent adding spacers then no point stretching

 

225/35 up front 235/40 rear.. those considered stretched? on the 8.5 and 10?

 

Similar offsets/widths as my wheels (but mine are 19s) but I'm running a 25mm spacer up front and 20mm out back so its flush.

Unless you are absolutely set on a specific wheel I would look into some with lower offsets. No reason to run spacers if you don't have to.,

 

what size tires are you using?

 

Yokohama S-drives 225/35/19 on a 8.5




Yokohama S-drives 235/35/19 on a 9.5






Rear is slightly more stretched than the front