Thanks for the tip! haha
The day I do a full R35 trans swap...that'll be the day. lol

Any ideas on how you'd set it up? If I decide to fully beef/tune my G to 650hp, I know I'm going to have to build axles, trans, and driveshaft up for sure.

I just made this meme for fun. Someone just gave me the idea.

Still on paper at this point. But all I did was read this article and it specifies that you shouldn't do the swap! I figured I'm an *** so why not go for it!
http://www.superstreetonline.com/fea...nissan-350z-r/
That meme is dope by the way!

Finally installed aluminum Mishimoto Radiator.

How is the fitment and installation.

Install was tougher than I expected. Separating the A/C Condenser off the radiator was half the pain. Learned a trick for next round if ever...use a wrench to lift the condenser out of the radiator bracket from the bottom. The Mishimoto radiator is great build quality, but it seems the bottom right tube/welded leg was about 2mm off so it wouldn't go all the way into the bottom tray/mounting hole. I'll have to go back to it and dremel out the hole and of course, I had to dremel the fan housing more for my oil catch can.

Slim fans are on the way from Mishimoto. Install time was 3hrs for me. Took my time to check and clean all of my intercooler piping.

Filling radiator fluid back up and checking trans fluids tonight before turning the key again.

Stop copying me, you even stole my name

haha..."often imitated, but never duplicated."

Huge thanks for the paddle shifters bro. I'll make the time to install those next.

APPLYING GYEON MOHS Q2 QUARTZ COATING



APPLYING GYEON MOHS Q2 QUARTZ COATING



APPLYING GYEON MOHS Q2 QUARTZ COATING



APPLYING GYEON MOHS Q2 QUARTZ COATING

Added red lipstick for her lip. :P
[/QUOTE]

What front lip is that? Do you have the link to where you bought it from?

What front lip is that? Do you have the link to where you bought it from?[/QUOTE]

You can buy this lip from OutcastGarage.com

Technically it's not a lip, it's a splitter correct? Yes I'm a little **** sometimes.

Yes, technically it's called a carbon fiber wind splitter. haha
Here's the link to buy one: http://www.outcastgarage.com/collect...tter-g35-sedan

Love your build bro, you are the reason I decided to Turbo Charge my M35x lol. Just Wrapped up the build and will be tuning the car tomorrow. Oh and a little side note I know a guy who can make a Adapter plate for our VQ engines to hook up to a R32 transmission. His name is Doug he works at a shop named Z fever in Tampa!!

Holy smokes! Killer build bro!...and about that R32 trans swap... I'm all for it! I've heard of Z Fever. Our stock trans can't handle over 400hp plus our driveshafts are prone to break later on. Keep me posted on your build.

Glad I inspired you to go twin turbo lol... You'll love it.