Let the Modding Begin....
#63
Yes. Eibach's for the 07-08 sedan, and Eibach (SPC) rear camber arms. I had my car aligned today; the toe is in spec all around, rear camber is at -1.3, and front camber is -1.5 and -1.8.
Those are great... thanks. Don't mind at all.
#67
WooHoo.. Here you go, Robby!
Let me know if you can do anything with any of these. Thanks!
https://g35driver.com/forums/4011921-post40.html
Let me know if you can do anything with any of these. Thanks!
https://g35driver.com/forums/4011921-post40.html
#68
WooHoo.. Here you go, Robby!
Let me know if you can do anything with any of these. Thanks!
https://g35driver.com/forums/4011921-post40.html
Let me know if you can do anything with any of these. Thanks!
https://g35driver.com/forums/4011921-post40.html
I'll get to it.
I have nothing else to do. I'm sick and pretty bad too
Swollen throat, infected ears, and this other ****. I hate it but this will keep my mind off of it lol
Should I PM you the pix when im done or what?
#69
Seriously, though... Take care of yourself... Don't worry about doing my pics right now.. get some rest.
#70
But naw, it wasnt the meat at all.
I slept with my window open and that night it was raining and the cold air and water got on my back. So then I got sick, so it was my fault.
But dont trip bro, i'll know these pictures right out. I cant even rest lol
#71
No problem... if you feel up to it. Don't work on them all... just work on the best pics (the ones you think will look the best). That'd be awesome.... you can send them to me via PM or e-mail them to me directly. I'll PM you my e-mail addy now. Thanks bro!
#73
#74
Quite a bit. It is around a 1/2" (12-13mm). I would say 10mm to be safe.
Yes. Eibach's for the 07-08 sedan, and Eibach (SPC) rear camber arms. I had my car aligned today; the toe is in spec all around, rear camber is at -1.3, and front camber is -1.5 and -1.8.
Those are great... thanks. Don't mind at all.
Yes. Eibach's for the 07-08 sedan, and Eibach (SPC) rear camber arms. I had my car aligned today; the toe is in spec all around, rear camber is at -1.3, and front camber is -1.5 and -1.8.
Those are great... thanks. Don't mind at all.
Also, is that the best the alignment one can do? Or can better #'s be achieved? I dont even know whats the normal spec.
THanks.
#75