When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'm a fabricator by trade, I was going to jump out the window and try to do the R32 GTR all-wheel-drive five speed trans, just a little FYI F160A is the front LSD part type which is the same as The R35 front LSD
Thanks for the tip! haha
The day I do a full R35 trans swap...that'll be the day. lol
Any ideas on how you'd set it up? If I decide to fully beef/tune my G to 650hp, I know I'm going to have to build axles, trans, and driveshaft up for sure.
I just made this meme for fun. Someone just gave me the idea.
Thanks for the tip! haha
The day I do a full R35 trans swap...that'll be the day. lol
Any ideas on how you'd set it up? If I decide to fully beef/tune my G to 650hp, I know I'm going to have to build axles, trans, and driveshaft up for sure.
I just made this meme for fun. Someone just gave me the idea.
Still on paper at this point. But all I did was read this article and it specifies that you shouldn't do the swap! I figured I'm an *** so why not go for it! http://www.superstreetonline.com/fea...nissan-350z-r/
That meme is dope by the way!
Install was tougher than I expected. Separating the A/C Condenser off the radiator was half the pain. Learned a trick for next round if ever...use a wrench to lift the condenser out of the radiator bracket from the bottom. The Mishimoto radiator is great build quality, but it seems the bottom right tube/welded leg was about 2mm off so it wouldn't go all the way into the bottom tray/mounting hole. I'll have to go back to it and dremel out the hole and of course, I had to dremel the fan housing more for my oil catch can.
Slim fans are on the way from Mishimoto. Install time was 3hrs for me. Took my time to check and clean all of my intercooler piping.
Filling radiator fluid back up and checking trans fluids tonight before turning the key again.
Love your build bro, you are the reason I decided to Turbo Charge my M35x lol. Just Wrapped up the build and will be tuning the car tomorrow. Oh and a little side note I know a guy who can make a Adapter plate for our VQ engines to hook up to a R32 transmission. His name is Doug he works at a shop named Z fever in Tampa!!
Love your build bro, you are the reason I decided to Turbo Charge my M35x lol. Just Wrapped up the build and will be tuning the car tomorrow. Oh and a little side note I know a guy who can make a Adapter plate for our VQ engines to hook up to a R32 transmission. His name is Doug he works at a shop named Z fever in Tampa!!
Holy smokes! Killer build bro!...and about that R32 trans swap... I'm all for it! I've heard of Z Fever. Our stock trans can't handle over 400hp plus our driveshafts are prone to break later on. Keep me posted on your build.
Glad I inspired you to go twin turbo lol... You'll love it.
