I'm parting out my G35. I don't want to, but the car is being sold. These parts have treated me well and I've never had a problem with any of them.

The SPC rear camber arms are SOLD

The Ichiba front camber arms SOLD

The 350z Tein H techs were not low enough for me so they have had approximately a half loop cut out of each. Pics show ride height. These springs are great! The ride is better than stock and really sets the look of the car. SOLD

 

here's some more

 

and more

 

so if you had to put a number on the drop from the springs what would it be?

 

It would be like S techs but with the same stock spring rate. I've got a little less than a finger gap in all four corners and zero rubbing running 30mm up front and 38mm in the rear (of course the rear fenders are rolled).

 

i need drop springs, just dont know how much.....still waiting on my wheels....glws, hopefully the springs and camber arms will still be here when my wheels show up

 

interested in the front camber arms going to pm you right now

 

PM'd

 

So I've been letting you guys know what is going on with the rubber around one of the ball joints. But pictures say a lot more. Both joints are still really really tight, tighter than my oem ball joints, so thats fine, but the rubber around one boot has a crack in it and folded inside.

 

I see thanks for the pictures, hope this wont be a major issue or could be easily replaced.

 

I'll take the front camber kit if it's still avail

 

sorry man just bought it

 

SPC Rear Camber arms and Tein Springs are still available. Price drop!

 

Payment Sent for Rear Arms...

 

Everything is sold. Thank you!