Vehicle Alarm Impact Sensor ??
#1
#3
Well, the part seems to be here: the only thing left is finding out whether it can be retrofitted to 07-09 models...
http://www.everythingnissanparts.com...99m2-vu003.htm
http://www.everythingnissanparts.com...99m2-vu003.htm
#6
To answer your question hybridamp, yes, this works.
So, I figured I would take one for the team here and order the OEM sensor from that link posted above to see if it worked. The sensor arrived in a "kit" that included the sensor, wiring harness (with ground ring terminal), tie straps, posi-tap style wire taps, a small business card style owners guide, and installation instructions for what I think is the coupe.
Followed the instructions and several minutes later, voila, shock sensor working. I had to use a slightly different mounting location because the location that the instructions specified was blocked on my sedan, so I used an adjacent location.
So, I figured I would take one for the team here and order the OEM sensor from that link posted above to see if it worked. The sensor arrived in a "kit" that included the sensor, wiring harness (with ground ring terminal), tie straps, posi-tap style wire taps, a small business card style owners guide, and installation instructions for what I think is the coupe.
Followed the instructions and several minutes later, voila, shock sensor working. I had to use a slightly different mounting location because the location that the instructions specified was blocked on my sedan, so I used an adjacent location.
#7
Trending Topics
#12
#13
The instructions show it installing to a large factory wiring harness near the BCM using a tie strap, but I couldn't get mine located on the harness as indicated due to a "Y" split in that harness. Maybe my sedan has an extra harness or something? Anyhow, I had another large wiring harness near the one indicated that it would fit on so I used it instead.
If you're curious about wiring, you tap three wires at the BCM using the included posi-tap style wire taps and connect a ground wire using a bolt near the BCM.
If you're curious about wiring, you tap three wires at the BCM using the included posi-tap style wire taps and connect a ground wire using a bolt near the BCM.
#15