Will the Akebono BBK's fit OEM 18s?
#1
Will the Akebono BBK's fit OEM 18s?
I hope this helps.
Template test fit on the front 18x7.5's
Template test fit on the rear 18x8.5's (If, say, someone was thinking of using rear wheels for the fronts.)
On both, you will certainly need spacers to clear the spokes. 10mm at least for the 8.5's, more for the 7.5's. *However*, notice the first photo above. The caliper head is barely touching the inner barrel. If you have wheel weights in the same area, the caliper will scrape those off.
Template test fit on the front 18x7.5's
Template test fit on the rear 18x8.5's (If, say, someone was thinking of using rear wheels for the fronts.)
On both, you will certainly need spacers to clear the spokes. 10mm at least for the 8.5's, more for the 7.5's. *However*, notice the first photo above. The caliper head is barely touching the inner barrel. If you have wheel weights in the same area, the caliper will scrape those off.
#5
#7
Trending Topics
#9
#10
the only thing that has an affect on that is the distance of the weights from the center of rotation. moving the weights along the rotational access won't have an affect.
#12
Thanks guys. The template was from CZP, a vendor here. Here's a link to the PDF.
Thread
Thread Starter
Forum
Replies
Last Post