11" Wide Tires Possible?
#17
You didn't have to pull the fenders to fit your wheels, Yoshi. Like I told you before, you could have pulled it off by just stretching the tires a bit.
#18
#19
#20
#21
You're doing something wrong then. Without the fender pulls and 275 tires on my 10.5 wheels, I was never rubbing in the rear. Oh and the camber was set at -1.8 in the rear with me inside. I understand that your offset is about 10mm more aggressive, but that shouldn't make much difference given you have some 2" pull in the fenders.
#27
Depending on wheel design or unless one likes deep wheel lips, I'd rather not deal with camber and stretching tires.
285 on 10", and zero camber can be done using +48 offset.
The benefits include max contact patch on the ground and no inside tire wear due to camber for max tire life.
Just my opinion.
285 on 10", and zero camber can be done using +48 offset.
The benefits include max contact patch on the ground and no inside tire wear due to camber for max tire life.
Just my opinion.
Thread
Thread Starter
Forum
Replies
Last Post