P2a00

Old Apr 10, 2015 | 07:23 PM
  #1  
yellaboyla's Avatar
Thread Starter
|
Registered User
Joined: Apr 2015
Posts: 2
Likes: 0
P2a00

Hi guys,
First post!!


Well I took the dive and bought a 2008 G35 Sedan...Yay!! Has 107k miles on it, but super clean.


Anyways, it is throwing up a P2A00 error code at AutoZone. So I been reading in this forum, G37, and the 350Z forums about it. Comes down to either and O2 sensor or cats.


Where do I start? Which ones come first? No dealer within 2 hours of here.


AND, are there any differences in O2 sensors? I see prices from 17 to 300 a piece!!


Thanks!!!
 
Reply
Old Sep 14, 2015 | 03:27 PM
  #2  
eLiguL's Avatar
Registered User
Joined: Sep 2015
Posts: 2
Likes: 0
Bring it to your mechanic so he can run a full diagnostic on your car. There are multiple causes for P2a00, not just the 02 sensor or cats. See below for other possible causes:

Possible causes
- Air Fuel Ratio (A/F) Sensor Bank 1 Sensor 1
- Air Fuel Ratio (A/F) Sensor Bank 1 Sensor 1 harness is open or shorted
- Air Fuel Ratio (A/F) Sensor Bank 1 Sensor 1 circuit poor electrical connection
- Fuel pressure
- Fuel injector
- Intake air leaks


Read more: http://engine-codes.com/p2a00_nissan.html#ixzz3lk6eW56w


I recently had this code and for me it was 2 holes in my exhaust. Had nothing to do with my cats or O2 sensor. The A/F ratio was off since it was running rich but with the added oxygen coming in from the two holes it was registering as lean.
 
Reply
Old Sep 14, 2015 | 04:42 PM
  #3  
eLiguL's Avatar
Registered User
Joined: Sep 2015
Posts: 2
Likes: 0
Double post.
 

Last edited by eLiguL; Sep 15, 2015 at 10:01 AM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Algy
Intake & Exhaust
27
Oct 8, 2018 07:17 PM
royalflush
G35 Sedan V36 2007- 08
8
Feb 9, 2018 11:49 AM
g35coupe253z
Engine, Drivetrain & Forced-Induction
10
Feb 9, 2018 11:46 AM
Dubski
G37 Coupe V36 2008+
5
Mar 1, 2016 11:56 AM
haz37
General Tech Questions
9
Oct 16, 2014 05:25 PM


Thread Tools
Search this Thread
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 02:55 PM.