V36 General Tech Questions Questions and Posts that Do Not fit under the other Tech catagories

Resetting ECU after every NA mod???

Old Jul 23, 2008 | 05:09 PM
  #1  
Linner's Avatar
Thread Starter
|
Registered User
Joined: Mar 2008
Posts: 188
Likes: 1
From: N New Jersey
Resetting ECU after every NA mod???

Whats everyones stand on this, I used to reset my ecu in my lexus all the time after a mod, but I havent in the g35 yet.

I always hear two different sides of the story. Just wondering what everyone else does. Shouldnt the ecu just relearn everything anyway from the car breathing better? Is it really necessary to reset the ecu?
 
Reply
Old Jul 23, 2008 | 07:00 PM
  #2  
terrycs's Avatar
Registered User
iTrader: (54)
Joined: Dec 2006
Posts: 3,519
Likes: 32
From: Southern California
Premier Member

I never reset my ECU after exhaust intallation. I figure if it's gonna learn, it will adjust based on the most recent data.
 
Reply
Old Jul 23, 2008 | 07:53 PM
  #3  
sredish's Avatar
Registered User
Joined: Jun 2008
Posts: 918
Likes: 3
From: Chandler AZ
what terry said, although I don't see what it'd hurt. may or may not help but won't hurt.
 
Reply
Old Jul 24, 2008 | 05:21 PM
  #4  
kool_yaar's Avatar
Registered User
iTrader: (7)
Joined: Oct 2007
Posts: 5,208
Likes: 185
From: Somewhere
i think its everyones personal preference, if you reset the ECU the computer just learns the mods changes quicker and you get faster yet harsher results as the computer starts to re-leran the basics. However, if you do not reset it will still modify according to your mod but might take a little while...
 
Reply
Old Jul 24, 2008 | 07:31 PM
  #5  
terrycs's Avatar
Registered User
iTrader: (54)
Joined: Dec 2006
Posts: 3,519
Likes: 32
From: Southern California
Premier Member

I think it re-learns much quicker. I let Alan drive my car around when we were doing the exhaust comparisons and I can easily tell the car was reving much higher when I got it back after his high speed passes. Everything went back to normal on the way back home.
 
Reply
Old Jul 24, 2008 | 09:26 PM
  #6  
Hanjob's Avatar
Registered User
Joined: Jul 2008
Posts: 10
Likes: 0
make sure to reset the ECU when you do mods like splitters, rims, and suspension.
 
Reply
Old Jul 25, 2008 | 12:51 AM
  #7  
kool_yaar's Avatar
Registered User
iTrader: (7)
Joined: Oct 2007
Posts: 5,208
Likes: 185
From: Somewhere
^ That's a must otherwise they will not perform as advertised...
 
Reply

Trending Topics

Old Jul 25, 2008 | 01:28 AM
  #8  
hawaiinpunch's Avatar
Registered User
Joined: Aug 2007
Posts: 3,181
Likes: 82
From: Los Angeles
sorry for the thread jack..so i dont know much about this..so wen u buy new rims..u should reset ur ecu..what the reason behinds this??
 
Reply
Old Jul 25, 2008 | 03:04 PM
  #9  
Linner's Avatar
Thread Starter
|
Registered User
Joined: Mar 2008
Posts: 188
Likes: 1
From: N New Jersey
thanks for the reply guys, i figured it would still learn it either way, i just didnt think its was a must....
 
Reply
Old Jul 25, 2008 | 03:05 PM
  #10  
Linner's Avatar
Thread Starter
|
Registered User
Joined: Mar 2008
Posts: 188
Likes: 1
From: N New Jersey
Originally Posted by PadillaG35
sorry for the thread jack..so i dont know much about this..so wen u buy new rims..u should reset ur ecu..what the reason behinds this??
no you dont have to reset your ecu for wheels.
 
Reply
Old Jul 25, 2008 | 05:56 PM
  #11  
Defratos's Avatar
You're Despicable
Joined: May 2008
Posts: 6,167
Likes: 33
From: on a sand dune
Premier Member

Originally Posted by Hanjob
make sure to reset the ECU when you do mods like splitters, rims, and suspension.
^ Splitters (not sure what these are), rims and suspensions.....ECU reset???.....why the hell would you do that?
 
Reply
Old Jul 26, 2008 | 04:38 AM
  #12  
Hanjob's Avatar
Registered User
Joined: Jul 2008
Posts: 10
Likes: 0
Originally Posted by Defratos
^ Splitters (not sure what these are), rims and suspensions.....ECU reset???.....why the hell would you do that?
sorry, noob joke
 
Reply
Old Jul 26, 2008 | 02:04 PM
  #13  
kool_yaar's Avatar
Registered User
iTrader: (7)
Joined: Oct 2007
Posts: 5,208
Likes: 185
From: Somewhere
^ atleast i got it...
 
Reply
Old Jul 26, 2008 | 03:03 PM
  #14  
C6Zhombre's Avatar
Registered User
iTrader: (1)
Joined: Jul 2008
Posts: 44
Likes: 3
From: South Texas
Originally Posted by Hanjob
make sure to reset the ECU when you do mods like splitters, rims, and suspension.

good one

at least from the chevy sbc world, I think the pcm reset/relearn was mainly for the idle, drivability and partial throttle operation. One or two blasts WOT through 4 gears and it's probably a done deal as far as a max capable dyno number with no tune. I'd actually be more worried about long term trims, like 3 weeks out and a couple of tanks. Lots of "untuned" cars will richen the mixture up over time and possibly create lower numbers than you began with. lower thermostat, reprogrammed fans and a basic tune would go a long ways to maintaining whatever you do get out of something like a cai mod.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Charchar66
New Members Check In
11
Dec 19, 2019 01:17 PM
g.spot
G35 Cars
12
May 9, 2016 10:54 PM
prinny
The G-Spot
6
Nov 22, 2015 11:07 PM
RWDguy4238
The G-Spot
0
Sep 30, 2015 12:13 AM
vamarris
Engine, Drivetrain & Forced-Induction
0
Sep 26, 2015 12:56 PM


Thread Tools
Search this Thread
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 03:37 AM.