Stillen's Rear Camber Adjusters
#17
Re: Stillen's Rear Camber Adjusters
I just got back from hawaii. I'll try to get them installed this weekend. i'll let you know how they work out. I think I got the kits delivered already. I just came home with a UPS slip saying I have a package and my neighbor signed for them. It's to late to knock on the door to get them.
G35C 6MT / AMG E55
G35C 6MT / AMG E55
#18
#19
Re: Stillen's Rear Camber Adjusters
FYI - the rear camber is adjustable from the factory. My camber was -2.33 from the factory and was adjusted to -.50 for the cost of an alignment only.
ZEX wet kit 140 WHP
ZEX remote opener, bottle heater
Denso iridium 2 steps
Z tube, Amsoil filter
JIC-Magic traction rods
BFG Drag Radials 265/40/18
12.85 @ 108.5
ZEX wet kit 140 WHP
ZEX remote opener, bottle heater
Denso iridium 2 steps
Z tube, Amsoil filter
JIC-Magic traction rods
BFG Drag Radials 265/40/18
12.85 @ 108.5
#20
#21
Re: Stillen's Rear Camber Adjusters
yeah but these polished stainless camber arms sure look better than the black factory ones!
2003.5 G35 Silver/Graphite 6MT Premium Coupe
19" Gunmetal TE37s & 275/30 Michelin Pilot Sports
kg/mm supersport springs
Alpine/JL Audio/Stinger
double din, he-he-he
2003.5 G35 Silver/Graphite 6MT Premium Coupe
19" Gunmetal TE37s & 275/30 Michelin Pilot Sports
kg/mm supersport springs
Alpine/JL Audio/Stinger
double din, he-he-he
#22
Re: Stillen's Rear Camber Adjusters
Just finished installing and aligning my wheels.
Camber bar works great. The craftsmanship on the camber bar is superb.
Here is my NEW problem. When I asked to set the camber to -1 my left rear could not get the toe to spec. My rights was perfect. Cause of the toe couldn't get into spec, I had to find a happy medium and had to settle with -1.9 degrees in the rear. I really wanted 1.3ish.
I'm still trying to figure out why the left rear is like that. I'm guessing it is a bit lower than rights. As mentioned on the board, people that have installed the eibach mentioned the left rear is lower than the right.
PS. I forgot to add that my camber was -2.5 before.<P ID="edit"><FONT class="small"><EM>Edited by wreck on 10/08/03 02:29 PM.</EM></FONT></P>
Camber bar works great. The craftsmanship on the camber bar is superb.
Here is my NEW problem. When I asked to set the camber to -1 my left rear could not get the toe to spec. My rights was perfect. Cause of the toe couldn't get into spec, I had to find a happy medium and had to settle with -1.9 degrees in the rear. I really wanted 1.3ish.
I'm still trying to figure out why the left rear is like that. I'm guessing it is a bit lower than rights. As mentioned on the board, people that have installed the eibach mentioned the left rear is lower than the right.
PS. I forgot to add that my camber was -2.5 before.<P ID="edit"><FONT class="small"><EM>Edited by wreck on 10/08/03 02:29 PM.</EM></FONT></P>
#23
Re: Stillen's Rear Camber Adjusters
wreck,
you got the ones from lsdunique on 350z correct? I just got those and was wondering if they were hard to install. so they work great and look great?
2003.5 G35 Silver/Graphite 6MT Premium Coupe
19" Gunmetal TE37s & 275/30 Michelin Pilot Sports
kg/mm supersport springs
Alpine/JL Audio/Stinger
double din, he-he-he
you got the ones from lsdunique on 350z correct? I just got those and was wondering if they were hard to install. so they work great and look great?
2003.5 G35 Silver/Graphite 6MT Premium Coupe
19" Gunmetal TE37s & 275/30 Michelin Pilot Sports
kg/mm supersport springs
Alpine/JL Audio/Stinger
double din, he-he-he
#24
Re: Stillen's Rear Camber Adjusters
Yah I got them from lsdunique. Once I realized I couldn't jack up the car safely and work under my car, I went to a local tire shop (been going there for over 10 years) and had them do it. The charged me $95 with alignment. It took them about 1.5. It's cool watching the numbers change on the computer screen when they made the camber and toe adjustent. It was frustrating to see my left rear toe out of spec when the camber was set to how I wanted it.
They worked perfectly. They look good too.
G35C 6MT / AMG E55
They worked perfectly. They look good too.
G35C 6MT / AMG E55
#27
#28
#29
Re: Stillen's Rear Camber Adjusters
cool, they look great, i cant figure out the traction bars either so i ujust got the cambers, i am glad you can see them that well from behind, i think im gonna get mine powdercoated blue so they will match my springs and sways. either that or polished.
2003.5 G35 Silver/Graphite 6MT Premium Coupe
19" Gunmetal TE37s & 275/30 Michelin Pilot Sports
kg/mm supersport springs
Alpine/JL Audio/Stinger
double din, he-he-he
2003.5 G35 Silver/Graphite 6MT Premium Coupe
19" Gunmetal TE37s & 275/30 Michelin Pilot Sports
kg/mm supersport springs
Alpine/JL Audio/Stinger
double din, he-he-he
#30
Registered User
iTrader: (2)
Join Date: Jan 2003
Location: Chicago, Illinois
Posts: 788
Likes: 0
Received 0 Likes
on
0 Posts
Re: Stillen's Rear Camber Adjusters
Finally got my cam kit instgalled (LSDunique?). The specs for the rear are 1.5. The fronts are off, but there are no kits available. The car handles much bette and it seems quieter - maybe the camber made the wheels ride odd and thus produce more noise or it could be my imagination.
Either way, great combo - Eibachs and Cam kit.
G35 Coupe 5AT, DP, Tire and Wheel Pkg., Aluminum Pedals, Clear Corners, missing turbo
Either way, great combo - Eibachs and Cam kit.
G35 Coupe 5AT, DP, Tire and Wheel Pkg., Aluminum Pedals, Clear Corners, missing turbo