Have a Question/s About Wheels/Tires/Offsets/Camber/Etc? Ask here::
#4097
with the 20x8.5 +20 and 20x10 +25 i would suggest a 10mm spacer all around to make it better flush on the guards....you wouldn't rub in the back unless you didn't roll your fenders, if you roll them you won't have that problem...camber kits are simple, they replace an oem part of your suspension that allows you to correct your camber when you lower a car...a car natural gains negative camber as you lower it and usually most people will need rear camber kits if they go more than an inch of a drop...it helps you so that your tires do not wear out unevenly
#4098
with the 20x8.5 +20 and 20x10 +25 i would suggest a 10mm spacer all around to make it better flush on the guards....you wouldn't rub in the back unless you didn't roll your fenders, if you roll them you won't have that problem...camber kits are simple, they replace an oem part of your suspension that allows you to correct your camber when you lower a car...a car natural gains negative camber as you lower it and usually most people will need rear camber kits if they go more than an inch of a drop...it helps you so that your tires do not wear out unevenly
#4100
Registered User
iTrader: (18)
Join Date: Sep 2007
Location: Auckland, New Zealand
Posts: 10,359
Received 1,939 Likes
on
1,249 Posts
#4103
#4104
Registered User
iTrader: (18)
Join Date: Sep 2007
Location: Auckland, New Zealand
Posts: 10,359
Received 1,939 Likes
on
1,249 Posts
#4105
You won't really be able to get the flush look with those specs/offsets without spacers, sorry....and i wouldn't cheap out on suspension parts, so i'd go with spc rear camber arms, they aren't the hardest thing to install but definately one of the easier suspension mods to DIY
http://www.ebay.com.au/itm/SPC-EXTRE...item5d349bb4fd
Is there a way to get the camber kit cheaper than that price on Ebay?
#4106
I'm just talking to a mate that has the EXACT same rim setup and offset as what i'm looking at and he's lowered on Eibach springs 1.1'' drop and has no problem at all with rubbing, just waiting for some pics to see how it looks. He has just bought a camber kit and is going to roll the back fender so i think i will go with the camber kit as well just depends how it looks with and without it and as i said before its my daily drive so i dont want it super low just looking nice and clean.
#4107
#4108
The following users liked this post:
ciraleon (08-21-2012)
#4109
#4110
Ok....Im a newbie here and I know this question has been asked a million and now a million and one times but I just got a set of 20x10's with a 20mm offset, I want to stretch the tires too what size would anyone recommend to do so and will I need spacers, if so what ones? Thanks in advance!!!