Wheels & Tires Grabbing the road and stopping.

Have a Question/s About Wheels/Tires/Offsets/Camber/Etc? Ask here::

Thread Tools
 
Search this Thread
 
Rating: Thread Rating: 3 votes, 3.67 average.
 
  #5986  
Old 08-27-2013, 09:27 PM
suham05's Avatar
Registered User
iTrader: (1)
Join Date: Apr 2013
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Im also dropped on tein s techs...im poking a whole lot more than i thought i would be obviously so im trying to eliminate that as much as i can. I would post pics but im on my phone.
 
  #5987  
Old 08-27-2013, 09:30 PM
Drew113's Avatar
Ban Hammer Expert

iTrader: (31)
Join Date: Jan 2010
Location: Back in the OC FTMFW!
Posts: 9,884
Received 635 Likes on 551 Posts
Yeah your gonna need to go much lower with those specs and get spacers for the front
 
  #5988  
Old 08-27-2013, 09:41 PM
suham05's Avatar
Registered User
iTrader: (1)
Join Date: Apr 2013
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Im adjusting it to half an inch lower tomorrow. Not stechs my bad but tein street basis coilovers. hopefully with that and some negative camber i can get rid of a good amount of poke in the rear.
 
  #5989  
Old 08-27-2013, 10:02 PM
Drew113's Avatar
Ban Hammer Expert

iTrader: (31)
Join Date: Jan 2010
Location: Back in the OC FTMFW!
Posts: 9,884
Received 635 Likes on 551 Posts
Basics don't go very low but at least they're better than springs...but yes you will need spacers for front
 
  #5990  
Old 08-27-2013, 10:02 PM
suham05's Avatar
Registered User
iTrader: (1)
Join Date: Apr 2013
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
And to think i spent months searching for the right wheels and still messed it up lol
 
  #5991  
Old 08-27-2013, 10:05 PM
Drew113's Avatar
Ban Hammer Expert

iTrader: (31)
Join Date: Jan 2010
Location: Back in the OC FTMFW!
Posts: 9,884
Received 635 Likes on 551 Posts
What wheels are they?
 
  #5992  
Old 08-27-2013, 10:12 PM
suham05's Avatar
Registered User
iTrader: (1)
Join Date: Apr 2013
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Ssr sp1's...i love the way these look. Hopefully i can get it looking decent.
 
  #5993  
Old 09-01-2013, 03:24 AM
guitarrocker98's Avatar
Registered User
iTrader: (4)
Join Date: Oct 2011
Posts: 3,065
Received 211 Likes on 179 Posts
Me thinks I need more camber..... So or spc, spl, or stance arms? I'm running 245 and 275 I believe. By 35 on both I thinks that's the tire number. Last owner ran -4 camber up front -5 rears. I need some help on fitment. Will I need to sell my 275's and go to 255 tires on the rear? Can I make my 275's work? Im debating running semi aggressive camber until these tires are shot then straightening them out a little bit later. My possibility 2 is widening out my rear end. Im just un sure on what to do. I am rolled flat and slightly pulled in the rears. I may have to pull more.

Specs are

19x10 -5 front
19x11 - 10 rears.






 
  #5994  
Old 09-01-2013, 04:32 AM
TGMcCoy's Avatar
Registered User
iTrader: (6)
Join Date: Mar 2004
Location: Portland, Oregon
Posts: 1,256
Received 95 Likes on 88 Posts
I saw the pic of the previous owners car. What tire sizes where they running? I would get the same tire sizes, set the camber -4 and -5 degrees, drop it and then pull to fit. Done!
 
  #5995  
Old 09-01-2013, 04:37 AM
guitarrocker98's Avatar
Registered User
iTrader: (4)
Join Date: Oct 2011
Posts: 3,065
Received 211 Likes on 179 Posts
Ya you and me have chatted about sizes before. I think he was on 255. I just dont feel like dropping about 1000 more into the suspension setup. Dunno though. I may. Just wish my 275 would work.
 
  #5996  
Old 09-01-2013, 05:11 AM
TGMcCoy's Avatar
Registered User
iTrader: (6)
Join Date: Mar 2004
Location: Portland, Oregon
Posts: 1,256
Received 95 Likes on 88 Posts
Only way to know is to mount the tires and test fit. But for sure get front and rear camber arms...
 
  #5997  
Old 09-01-2013, 05:13 AM
TGMcCoy's Avatar
Registered User
iTrader: (6)
Join Date: Mar 2004
Location: Portland, Oregon
Posts: 1,256
Received 95 Likes on 88 Posts
I know the best fender roller and puller in town. He's in Gladstone I think? Not too far from you
 
  #5998  
Old 09-01-2013, 05:23 AM
guitarrocker98's Avatar
Registered User
iTrader: (4)
Join Date: Oct 2011
Posts: 3,065
Received 211 Likes on 179 Posts
yea, one problem is my car does not go anywhere.
 
  #5999  
Old 09-01-2013, 05:38 AM
TGMcCoy's Avatar
Registered User
iTrader: (6)
Join Date: Mar 2004
Location: Portland, Oregon
Posts: 1,256
Received 95 Likes on 88 Posts
Pay him to come out there possibly.
 
  #6000  
Old 09-01-2013, 12:34 PM
guitarrocker98's Avatar
Registered User
iTrader: (4)
Join Date: Oct 2011
Posts: 3,065
Received 211 Likes on 179 Posts
yea thats a possibility. PM me his info. I may shoot him a text.
 


You have already rated this thread Rating: Thread Rating: 3 votes, 3.67 average.

Quick Reply: Have a Question/s About Wheels/Tires/Offsets/Camber/Etc? Ask here::



All times are GMT -4. The time now is 05:37 PM.