Eh guys.

Swapping out a couple sets of 15mm Ichiba V2 spacers with 20 and 25mm sets. Just wondering if the hubcentric rings are all the same width? Wanting to just take the new incoming set and sell them with the used 15mm ones. Will that work or are the widths important?

 

Quick question...if im getting some wheels 20x9.5/10.5+15 with step lip...and if i choose r-disk..does that mess with the width???? i plan on getting a bbk later down the road but just curious if i just stuck with like an O-disk and just upgraded from oem rotors and pads to some stoptechs or something...just wanting to know basically if getting the r-disk am i going to be losing width..thanks

 

No, R-Disc face does not mess with the width at all. It just gives you more clearance for your BBK. You will lose lippage tho, but that is the sacrifice you make for running a BBK too.

 

^^^^ thanks bro....i really aint trying to loose lippage though..what to do ////what to do....

 

Fitment question: I have an 04 sedan with aero kit. Does anyone know if staggered wheels off a G37 sport coupe will fit? The specs are: 225/45/19 front (19x8.5 / 43mm /) and 245/40/19 rear (19x9 / 45mm). Thanks!

 

what do you think about ssr ms1's on my silver coupe? the wheels are gonna be super black coat

 

^ money.

 

O-disk and BBK is a big no-no...

i think at least a 25-mm spacer is needed just for O-disk to clear factory Brembos.

 

that will NOT work.
if u think about it the 15-mm ring will be too short for a 20 or 25-mm spacer, and the other way around too.

 

i think before anyone asks about a fitment question, they should say what look they're going for... slammed/hella-flush look or sporty/aggressive look.

 

O Disc will clear the rear, but not the front.

 

^ true, i meant the rears haha.

 

Yes, it will fit. I have them on my 03. I had those size tires. Then went to 245/35 frt & 275/35 rr with 10mm spacers all around (which made a nice looking difference) , rolled fenders, and coilovers. Search and you'll find other members have them too.

 

how low of an offset can i go with some 20" ssr ms1s with just my fenders rolled? and i dont have brembos either

 

Anyone have a picture of a 19x10.5 rim with 295/30 on it?
I have found pictures of a 295/35, and its too "meaty" for my taste.
Wondering if the 295/30 will be just as "meaty". May have to stick with 285/35