What Sub are you running in your 4080 box?
#32
10-13-2008, 05:26 AM
Join Date: Aug 2003
Location: Seattle, WA
Posts: 7,288
Likes: 0
Received 0 Likes
on
0 Posts
#33
10-13-2008, 12:05 PM
#34
10-13-2008, 12:07 PM
Originally Posted by Triple8Sol
Well my 10" IDQ v.3 came in today, and got it installed. It's a very tight fit, so it will be a b*tch if I ever want to get it out. Grille fits too.
Just curious what part was a tight fit and whether this is driver's side or passenger's side.
#35
10-13-2008, 05:03 PM
Join Date: Aug 2003
Location: Seattle, WA
Posts: 7,288
Likes: 0
Received 0 Likes
on
0 Posts
#36
10-14-2008, 07:05 PM
#42
11-24-2008, 10:50 AM
Originally Posted by k67p67
G35 coupe
driver's side
Image Dynamics / IDMAX10 D2 v.3
needed to add 1.5" of MDF spacer rings to accommodate depth; 4080 grille is not usable without reglassing front of enclosure
driver's side
Image Dynamics / IDMAX10 D2 v.3
needed to add 1.5" of MDF spacer rings to accommodate depth; 4080 grille is not usable without reglassing front of enclosure
but anyway, the grille fits on and that box is SEALED like a ****, added a little weatherstripping under the sub, there is 0 leakage. glass boxes are nice
#43
11-12-2009, 03:54 AM
hey i put a idmax 10d4 V3 in my 40080 (sedan)
i cut away a bit of the ring so the sub fit in, and added a 1/4" spacer for depth. granted i didnt have screws to screw all the holes in, it seemed to be making alot of noise. probably 2morrow im gonna pull the sub, put some weather stripping in, and try that. however, it made some like rattling noises, does anyone know about that? and i ran it for like 15 min, and came back and had a slight frying smell...
i cut away a bit of the ring so the sub fit in, and added a 1/4" spacer for depth. granted i didnt have screws to screw all the holes in, it seemed to be making alot of noise. probably 2morrow im gonna pull the sub, put some weather stripping in, and try that. however, it made some like rattling noises, does anyone know about that? and i ran it for like 15 min, and came back and had a slight frying smell...
#45
11-18-2009, 06:01 PM
ok, thank you. so i guess im just gonna have to bite the bullet and buy it to see if it fits and if it doesnt then i guess im out some money? i emailed 4080 enclosures about a week ago and havent heard anything back.
looking at pictures, it looks very similar to the jl10w6v2 so i bet it will fit, i guess i could always get a spacer too
looking at pictures, it looks very similar to the jl10w6v2 so i bet it will fit, i guess i could always get a spacer too
THanks,
4080