2005 Dash Dissassembly
2005 Dash Dissassembly
Does anyone know where I can find a guide or DIY to dissassembling the 05 dash? a coin fell behind the ashtray and now it won't close.
Id rather not take it to the dealer so they can charge me an assload..
can someone point me to a thread with pictures detailing the disseassembly or at least a good description.
I've done a couple of searches and found nothing.
thanks!
Id rather not take it to the dealer so they can charge me an assload..
can someone point me to a thread with pictures detailing the disseassembly or at least a good description.
I've done a couple of searches and found nothing.
thanks!
https://g35driver.com/forums/audio-video-electronics/51031-05-dd-kit-diy.html This should help you out!
later
later
Originally Posted by Gee Im Fast
http://www.g-owners.com/article_read.asp?id=33. Pretty much the same for 05.
Originally Posted by Gee Im Fast
He has an auto though....
Trending Topics
removal of the shift ****? When I took mine apart, I left the shift **** on and just pushed the trim to the side. I didn't know how to take the shift **** off and I got lazy, so I didn't. I don't know why, but the hardest part was getting the side of the console back on. I think that took me 20 minutes alone. Also, the peice above the clock isn't firmly in place anymore for some reason - it comes off pretty easy.
Originally Posted by aznluder
removal of the shift ****? When I took mine apart, I left the shift **** on and just pushed the trim to the side. I didn't know how to take the shift **** off and I got lazy, so I didn't. I don't know why, but the hardest part was getting the side of the console back on. I think that took me 20 minutes alone. Also, the peice above the clock isn't firmly in place anymore for some reason - it comes off pretty easy.
also, remove your clock trim, put both together as one unit before reinstalling, put the bottom clips in the hole first, then bend the top down put them in the right holes, then the bottom will go in easily
Thread
Thread Starter
Forum
Replies
Last Post
Ninjay16
Audio/Video/Electronics
11
Feb 26, 2018 06:14 PM




