Going to see if i can find it. I wonder why when I shut my car door or bang on the rear window the sub gives off bass, maybe a bad ground or RCA too close to other wires? Where did you guys ground the amps at? I was thinking under the rear seat

 

i just did it to the metal in the trunk
make sure you take some sand paper and sond off the paint to get a good contact. also make sure that you ground the loc if it came with a ground wire

 

Cool. I didnt ground the loc or sand any contact, i'll do that though thank you. Is the power wire that runs to the bose amp red? so I can connect the remote wire to my amp so the damn thing wont stay on 24/7.

 

no you dont want a red wire for the remote turn on

you want a Light Blue/ Silver wire

 

So the wire I connect the blue remote wire to is either light blue or silver?

Thanks~

 

Here's the wiring info for the bose system. This should help. Connect the remote to the light blue/silver wire.

Factory speaker harness wiring colors

Front Right + Gray/Silver
Front Right - Yellow/Silver

Front Left + Green/Silver
Front Left - Red/Silver

Rear Door Right + Brown/Silver
Rear Door Right - Black/Silver

Rear Door Left + Green/Yellow
Rear Door Left - Black/Yellow

Rear Deck Right + Blue/Red
Rear Deck Right - Blue/White

Rear Deck Left + Blue/Yellow
Rear Deck Left - White/Green



Head unit output colors

Head Output Front Right + Orange/Blue
Head Output Front Right - White/Blue

Head Output Front Left + White
Head Output Front Left - Orange

Head Output Rear Right + Blue
Head Output Rear Right - Pink

Head Output Rear Left + Teal
Head Output Rear Left - Purple

Remote Wire Light Blue/ Silver

 

no the remote wire is a light blue wire with silver

 

How about this: When i turn my car off and exit , shutting the door the speaker gives off bass, could this be due to the RCA cable placement? I am going to ground the LOC and reground my amp tonight along with the remote wire hook up and see what happens.

Thanks for the help all ; )

 

Ok, everything works fine now. I sanded contacts and regrounded the amp/LOC and spliced into the remote switch/connected the amp, it finally turns on and off with the car now :P Now I am just waiting on my box to come in. I will buy another sub since I have a 12 now and the box is for a 10, does anyone have a suggestion what to couple to a Alpine MRD M300 V12? 340W, I was thinking a JL 10W3