DIY guide: KPtechnologies OEM alarm beep module install + video
#33
Originally Posted by KPierson
I've tapped in to the BCM for most of my voltage signals. You can find pretty much everything you need there, so it really makes for a clean and easy install.
hey kevin, i place the order of the EBM and i pay it but your confirmation says ( order not shipped ) that was on sunday. I was just cheking that wih you. It goes to Puerto Rico.
#35
I got mine installed about a month ago and I love it. The only problem is, about 1 out of 8 times I will press unlock button and here it beep only once and then if I press lock\unlock anymore, it won't beep at all. After I drive somewhere and press lock\unlock it will work perfectly. Not a big deal but I was wondering if there's anything I did wrong during the install or anything I can do to prevent this. Thanks in advance
#36
Thats odd. The only time it should 'ignore' lock/unlock pulses is for the first few seconds after you turn the ignition off.
If it is only beeping once on the 'unlock' pulse the CPU may be freezing for some reason. It shouldn't do this at all, and if you want to send it back for evaluation let me know.
If it is only beeping once on the 'unlock' pulse the CPU may be freezing for some reason. It shouldn't do this at all, and if you want to send it back for evaluation let me know.
#37
#39
Originally Posted by KPierson
It shouldn't ever beep when the ignition is on. That is strange. Contact me if you want to send it back and I'll give you the necesarry information.
#40
#41
#42
#43
#45