DIY: Clear Corners
#1
DIY: Clear Corners
Since I've been on driver I've received PMs from about 5 different people about how to install Clear Corners...
1. Pop the Amber Corner by simply tugging on it (gently). You'll be amazed at how easy it is to remove.
![](http://i144.photobucket.com/albums/r192/ahero4eternity/1.jpg)
2. This is what it should look like...
![](http://i144.photobucket.com/albums/r192/ahero4eternity/2.jpg)
3. Twist that gray piece (counter clockwise i believe) so it now looks like this...
![](http://i144.photobucket.com/albums/r192/ahero4eternity/3.jpg)
4. Pull the gray connector out of the Amber Corner.
![](http://i144.photobucket.com/albums/r192/ahero4eternity/4.jpg)
5. Get the Clear Corner in hand...
![](http://i144.photobucket.com/albums/r192/ahero4eternity/5.jpg)
6. Put the gray connector into the Clear Corner - be sure to align the notches so that it goes in all the way.
![](http://i144.photobucket.com/albums/r192/ahero4eternity/6.jpg)
7. Twist the connector (clockwise i believe) so it snaps back into place.
![](http://i144.photobucket.com/albums/r192/ahero4eternity/7.jpg)
8. Snap the Clear Corner back into the bumper...
![](http://i144.photobucket.com/albums/r192/ahero4eternity/8.jpg)
9. You're done...!
1. Pop the Amber Corner by simply tugging on it (gently). You'll be amazed at how easy it is to remove.
![](http://i144.photobucket.com/albums/r192/ahero4eternity/1.jpg)
2. This is what it should look like...
![](http://i144.photobucket.com/albums/r192/ahero4eternity/2.jpg)
3. Twist that gray piece (counter clockwise i believe) so it now looks like this...
![](http://i144.photobucket.com/albums/r192/ahero4eternity/3.jpg)
4. Pull the gray connector out of the Amber Corner.
![](http://i144.photobucket.com/albums/r192/ahero4eternity/4.jpg)
5. Get the Clear Corner in hand...
![](http://i144.photobucket.com/albums/r192/ahero4eternity/5.jpg)
6. Put the gray connector into the Clear Corner - be sure to align the notches so that it goes in all the way.
![](http://i144.photobucket.com/albums/r192/ahero4eternity/6.jpg)
7. Twist the connector (clockwise i believe) so it snaps back into place.
![](http://i144.photobucket.com/albums/r192/ahero4eternity/7.jpg)
8. Snap the Clear Corner back into the bumper...
![](http://i144.photobucket.com/albums/r192/ahero4eternity/8.jpg)
9. You're done...!
The following 3 users liked this post by Calvin:
#2
#3
#5
#7
Trending Topics
#9
#13
#15