So i got a fender roller off a buddy. But i was wondering if you guys roll the front or just the rear? would i have to take the plastic inner feder gaurd to roll'em?

 

anyone? rear is done.

 

My 06 front was rolled from the factory. So, I would only do the rear. I'm not sure if yours is the same way or not.

 

Front fenders are pre-rolled from the factory.

 

The 07+ Sedans are pre-rolled all around. They are friggin' lucky. I bet the 08+ coupes are the same way.

 

I guess you could call the front pre-rolled but they are def. not rolled flat thats for sure.

you can just do the rear unless you are very aggressive up front. Also you can only roll the fronts a very small amount before you need to modify the liner.

 

yeaa i figured that just rolled my rears.

 

Hey so I currently have 20's on my 06' sedan and the rear wheels are 20x10, they stick out about quarter to half an inch. And I notice it rubs on dips when going around 40+ especially if loaded, will rolling fenders help? Anyway to post a pic thru cell?

 

Our rear fenders can be both rolled and pulled if you can find the right person to do the job without damaging the fenders. The 1/4" you describe would be easy to clear so you're not wasting those tires...Gary

 

Thanks