I am rubbing when people sit in the back. I am running the eibach sportline springs and I have my rear fenders rolled. The wheels are he sevas s55s +40 offset 20x8.5 and 20x10. The weird thing is it is only the RIGHT side only never the left side. Can anyone help me out?

 

Any pics???

What size tires are you running in the rear?

The drop with the "Sportlines" is around 1.6" front and back. It might be too much. I'm running the "Pro-Kit" with no issues.

Have you had an alignment done recently? Your camber might be off a little.

Might be time for a camber kit in the rear....

 

I have Tein basics dropped really low. I have a finger and half gap between tire and fender. I rub on occasion. my camber is -1.8 in the rear.

 

whats your camber settings, tire size, and how much did you roll it? some pics would be great also

 

Here are the pics of her...........





Tokico D Spec shocks
SPC front and rear camber kit
Eibach sportline springs
Tire size 245/35/20 f and r 275/30/20
Wheels are Sevas S55 +40 offset all the way around.

As far as the camber that is being ran I have no ideal. I took it to butler tire to get a laser alignment and to get the fender rolled ........so as far as I know it should be good to go. Do you suggest that I should contact them for this information.

 

My car is that low right now with no problems.

Pic in my sig is old.

 

ttrank don't you have +45 offset in rear??? Im wonderin if he's rubbing on the inside or outside??

 

All sevas wheels for the sedan are a +40. I believe that Butler Tire needs to roll the fenders on that side a lil bit more. It's rubbing at the 12 o clock position ( on top of the tire where the rolled it at.

 

looks good..

but im torn between the silver and the chrome that ttrank has on his.. ive always like the clean style of the s55.