Who here has a sedan and running a camber kit being lowered and if so what brand camber kit . If you are not running a camber kit being lowered how is your tire wear and what wheels and tires are you rolling on. also how much are you lowered .

 

I'm running SPC camber kits on front and back. I'm sitting on 19x8.5 upfront and 19x9.5 in the rear. With the camber set back to factory coupe settings I get pretty even wear but still a little more in the inside corners as compared to the outside.

I'm lowered around 2 inches upfront and 1.5 in the rear.

 

I currently don't have camber kits installed but I do have SPC rear camber kit waiting to be installed. I'm riding on 19x8.5 wheels wrapped in 245/35/19 General Exclaim UHP tires. I'm lowered 1.1" both front and rear. I've only put in 1,400 miles with the new tires and springs so I have not seen any evident uneven tire wear.

 

no camber kit with S techs and 20x 8.5/10 and have had them on for awhile with no uneven wear....

 

read my preformance mods at the bottom.

 

I'm lowered about 1.5 inches on Tein Flex coilovers. I had Kinetix camber arms until the sockets got worn out. I now have Stillen camber arms on the front (Kinetix still working OK on the rear). I have 245/19 front and 275/19 rear Toyo T1R tires. It is an excellent setup and I would recommend it highly.

 

SPC Rear Kit.

 

How's the Megan rear camber? Any suggestions? I seem to wear the inner rear of the tire down to the metal and that is on stock suspension. I see a couple of you have the SPC. How is the weld quality on those?