Hi, everyone. I took my car to an alignment shop yesterday (Car has Megan coilover) and the guy called me and he said theres a problem. On the right side everything is fine, camber is setting at -3.5*. But on the left if he try to give more negative camber the toe will start to turn out. So basically the more negative camber = toe keep turning out.
Ive search but couldnt find anyone with similar problem. I was thinking may be the toe arm was bent.
Any help would appreciate it.

 

Do you have toe bolts

 

No, I don't have toe bolt as of right now.

 

You need toe bolts to get within specs with that amount of camber

 

Ok. But the right toe sit perfect though with that much camber just the left that out of whack. But I'll get the toe bolt anyway since I don't have them yet.

 

I hope you get your toe bots soon. Did you buy them already? I do have a set for sale just incase you didnt order it.

 

I'm surprised that your toe is even In specs on the right side. You have camber arms?

 

What year is your car?

 

Yes, I have SPL rear camber arm and my car is 04.

 

Are you running aftermarket arms? If you are dropped a substantial amount on those coils you will need a camber kit along with extended toe bolts as well as to elongate the holes for the toe bolts

 

Lets hope this toe bolts could bring it back to spec.

 

Could it be 'cause something was bent such lower control arm?

 

of course toe will change as camber changes. Toe is adjustable just like camber.

 

Toe bolts came in yesterday. If that dont fix the problem, i guess my next stop would be replace rear uca and lca (the one that hold the spring).

 

I already know the problem behind most of these alignment threads before i even read them lol...the guy doing the alignment is an idiot..of course adjusting the camber effects the toe