Sorry to hear the 'fix' didn't work, Sam, but at least you can get it up and stay up.
(can't believe I said that..... )........

Pretty sure the tensioner is incorrect and needs adjusting....

C.

 

Can't believe it either. LOL. Here's hoping Sam can keep it up.

 

Thanks Colin, I'll share your observations with N. BTW which **** (right or left ) adjust the tension

 

LOL.....

 

I have discovered that if I hold the switch in the up position while I'm driving for 5 ish seconds, I actually hear a click the window will stay in the up position. I'm gonna have it fixed when I get my belts done.

 

dont mean to ask but since windows is the topic anybody here have a cracking/creeking sound when the window goes all the way up.

and

when my DS window is half way down it sounds like its not seated well when I hit a bump or pothole.

 

whatacar - did you ever manage to figure out what went wrong with your window? I am having the same issue now.

I will try the reset procedure first, but from a bit of research it sounds like I may have a mis-aligned window regulator. Our symptoms however are very similar.

This all started after the 2nd time I cleaned the carbon deposits from my power window motor.

Another issue I am getting is that the window seems to stay stuck all the way down or all the way up, and will stay there unless I open and close the door (providing a vibration to the regulator/motor).

Sorry for bumping an old thread...

 

I just use the manual switch by lifting it almost to the limit of the switch. It goes up and stays up. I then release the switch.