Another turbo build
#16
and think that should be the price.
#21
@240vac has an efficiency of
100%@160a
60%@200a
#22
Well, time for an update. I managed to make the 2.75" intercooler piping fit just fine. It actually worked out really well. So this is good news. I ordered a bunch of stuff, so now I'm just waiting for it to arrive. Seems like Precesion turbo is a bit behind as there are many order that have fallen behind. I did get my hands on some Exa pumps as well, they should be here within two weeks.
So basically, everything is done as far as new "desighn" goes. I am hoping to have the large intercooler here mid next week so I can fit all that in and start with the 3" IC piping going to the TB. As you can see I did my best to avoid 90deg bends in the IC piping. Unfotunetly I had to have one just under the driver side header, everything else is 45deg. Should flow very well.
Here are a few pictures of how things are layed out this time around:
Now it is just a matter of duplicating every bend and welding it all together.
So basically, everything is done as far as new "desighn" goes. I am hoping to have the large intercooler here mid next week so I can fit all that in and start with the 3" IC piping going to the TB. As you can see I did my best to avoid 90deg bends in the IC piping. Unfotunetly I had to have one just under the driver side header, everything else is 45deg. Should flow very well.
Here are a few pictures of how things are layed out this time around:
Now it is just a matter of duplicating every bend and welding it all together.
#23
#24
Registered User
iTrader: (6)
Join Date: Jan 2007
Location: Hamilton, Ontario
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
I had to change the contrast of my monitor to read the white lettering on the almost white background. Didn't see a lable first time I looked. That is a nice unit for a 240V socket.
#25
The welding isn't bad at all, about one hours worth.