DIY 03 G35 Coupe 5AT to 07 G35S 5AT differential swap
If it looks like the 2007 I've posted and if you are able to swap the flange and the dust cover and cut the pinion shaft, YES it will fit 100%.
The only special tools I needed were a puller for the flange and an angle grinder with a cutting wheel.
It's currently installed under my 2003 G35 5AT. I will take pictures tonight since my car is in the garage.
okay, great. it's from an 08 haven't seen it in person, but the 07-08 have the same setup. if i don't have these tools, are they pretty common? what type of shops would prob have 'em on hand?
Here are a couple pics I took this morning


Thanks ! ... and I'll be doing some more... I'm from Saguenay so it's about 5 hours from you


Thanks ! ... and I'll be doing some more... I'm from Saguenay so it's about 5 hours from you
and I might also go to some events near Laval.To find one I'm not sure, since you're in a big city call a couple junkyards and probably that you'll be lucky. I've found mine on "Lespac.com" in Sherbrooke. I recently saw a 370Z complete for parts but I'm not sure if the seller want to part out. In the past I also saw 3.5 from a manual but not sure if that's what you looking for.
I will also check for the CC cause it may still works on speed below 80mph according to what I've read.
I can also give you my MPG but I did not record it before the swap, so it may be of no great value since each car/driver is different.



