Drivetrain Questions and info regarding transmissions, clutches, etc.

04 6MT clutch/tranny issue

Thread Tools
 
Search this Thread
 
Rate Thread
 
  #1  
Old 11-30-2011, 01:16 AM
SAMzG35's Avatar
Registered User
Thread Starter
iTrader: (5)
Join Date: Oct 2011
Location: Fort crack homie, AB
Posts: 2,509
Received 260 Likes on 210 Posts
G35
04 6MT clutch/tranny issue

First i would like to say that i'm fairly new into the technical world of manual transmissions and if what i say don't make any sense, give me a break.

Driving my 04 G35 last few days its been feeling pretty weird, its kinda gutless & also gas mileage is poop. Every time I switch gears it feels like the car is barely moving but the engine is revving up. Lets say if I'm going 30 km/h and I throw it 5th gear and I hit the gas pedal half way the RPM jumps to 4 or 5k RPM and the car barely moves. Today i decided to see if i can stall it. I started letting go of the clutch slowly and when I was all the way off the RPM started slowly dropping to 0 right before it shuts off i pressed it again and she revved back up to idle.

Now reading/searching online i saw few things. One of them that might be my issue:

#1, Cheaper way. My clutch might be too loose and if i tighten the clutch a turn maybe turn and a half it might help (my engaging/disengaging point is right before the end of releasing the pedal, not even an inch or so)?
#2, My clutch is gone, i need a new one?

Other info i found & didn't know is clutch fluid (i know i'm retarded, but only had the car for 2 weeks and this is the first manual car i own, i drove many before though). So could that be an issue?

The car is an 04 with 98k km (58k miles???) I'm pretty sure clutch was never changed, still factory one. Car still shifts very smoothly between all gears and i have no problem going into any gear


Any help is greatly appreciated.

Sammy K.
 
  #2  
Old 11-30-2011, 10:39 AM
Z1Motorsports's Avatar
Banned
iTrader: (8)
Join Date: Jan 2007
Location: Carrollton, GA
Posts: 2,383
Received 69 Likes on 55 Posts
Sounds like your clutch is shot. Your not going to be able to adjust out that problem, depending on how they have been treated the average stock clutch lasts 60k-100k miles.

Let me know if I can help you with anything,
-Rob
 
  #3  
Old 11-30-2011, 11:27 AM
Texasscout's Avatar
Registered User
iTrader: (11)
Join Date: Feb 2005
Location: South Texas
Posts: 35,605
Received 2,116 Likes on 1,768 Posts
Yep, clutch is shot. One of the Sponsors here on the forum. You can get anything from stock to full race clutch packs here.

Get ready to fork out over a grand also.
 
  #4  
Old 11-30-2011, 11:55 AM
SAMzG35's Avatar
Registered User
Thread Starter
iTrader: (5)
Join Date: Oct 2011
Location: Fort crack homie, AB
Posts: 2,509
Received 260 Likes on 210 Posts
G35
being in fort mc im pretty sure its way more than a grand, average shop charged 180+ per hour.

Any suggestions on clutches? whether to get OEM or after market? Price wise whats the best bang for my buck kinda clutch
 
  #5  
Old 11-30-2011, 12:11 PM
Z1Motorsports's Avatar
Banned
iTrader: (8)
Join Date: Jan 2007
Location: Carrollton, GA
Posts: 2,383
Received 69 Likes on 55 Posts
Originally Posted by SAMzG35
being in fort mc im pretty sure its way more than a grand, average shop charged 180+ per hour.

Any suggestions on clutches? whether to get OEM or after market? Price wise whats the best bang for my buck kinda clutch
Best bang for your buck would be our Clutch/Flywheel combo, I do not recommend reusing the OE flywheel. Our package can be found HERE

Wow, $180 an hour!?! That's insane.

-Rob
 
  #6  
Old 11-30-2011, 12:22 PM
Texasscout's Avatar
Registered User
iTrader: (11)
Join Date: Feb 2005
Location: South Texas
Posts: 35,605
Received 2,116 Likes on 1,768 Posts
I used a Jim Wolf Technology clutch package (Lightened flywheel, clutch element, pressure plate, throw out bearning, stainless steel clutch line, and bearing insert) for about $800 and the labor made it all about $1200. Ordered from www.importpartspro.com one of the site sponsors.
 
  #7  
Old 11-30-2011, 01:19 PM
AARONHL's Avatar
Registered User
iTrader: (15)
Join Date: Oct 2007
Location: ɷCONNECTICUTɷ
Posts: 4,334
Received 121 Likes on 113 Posts
Wow, too bad the previous owner didn't tell you the clutch was going...something like that doesn't happen in two weeks.
 
The following users liked this post:
Z1Motorsports (11-30-2011)
  #8  
Old 11-30-2011, 01:33 PM
faiz23's Avatar
Registered User
iTrader: (2)
Join Date: Nov 2006
Location: Your mom's bed
Posts: 2,198
Received 290 Likes on 218 Posts
Read the million threads on clutches and see what to do. I would shop around and only pay max of $500 in labor for clutch. I have already sourced out shops that will do it for $300-350 and friend who has done 12-13 clutch jobs on G35/350z and should be a little lower / some booze


$775 for clutch kit with all parts minus fluid.

https://g35driver.com/forums/engine-...-shipping.html

MAX LABOR $500.

https://g35driver.com/forums/dfw-cla...-specials.html
 
  #9  
Old 11-30-2011, 02:44 PM
Texasscout's Avatar
Registered User
iTrader: (11)
Join Date: Feb 2005
Location: South Texas
Posts: 35,605
Received 2,116 Likes on 1,768 Posts
That's the one I ordered. It cost $400 to install.
 
  #10  
Old 11-30-2011, 04:07 PM
SAMzG35's Avatar
Registered User
Thread Starter
iTrader: (5)
Join Date: Oct 2011
Location: Fort crack homie, AB
Posts: 2,509
Received 260 Likes on 210 Posts
G35
i had the JWT in mind but i read something online about them changing their clutches and they are not the same ones they used to carry, not sure how legit this is.

As for labour, i called two places and was quoted approx $1100.00 bucks!! just for labour. Labour was $189.95 an hour at one place and the other was $195.00

isnt that insane?
 
  #11  
Old 11-30-2011, 04:24 PM
Texasscout's Avatar
Registered User
iTrader: (11)
Join Date: Feb 2005
Location: South Texas
Posts: 35,605
Received 2,116 Likes on 1,768 Posts
Yes! That's nutz.
 
  #12  
Old 12-02-2011, 02:14 AM
SAMzG35's Avatar
Registered User
Thread Starter
iTrader: (5)
Join Date: Oct 2011
Location: Fort crack homie, AB
Posts: 2,509
Received 260 Likes on 210 Posts
G35
before i go ahead and order my clutch i just wanted to confirm this

any ideas/thoughts?



 
  #13  
Old 12-02-2011, 02:40 AM
Songle6MT's Avatar
Registered User
iTrader: (9)
Join Date: Jan 2011
Location: MN/ND
Posts: 1,515
Received 56 Likes on 44 Posts
Yikes, that would be a bad clutch
 
  #14  
Old 12-02-2011, 02:55 AM
SAMzG35's Avatar
Registered User
Thread Starter
iTrader: (5)
Join Date: Oct 2011
Location: Fort crack homie, AB
Posts: 2,509
Received 260 Likes on 210 Posts
G35
so clutch for sure correct?

you think tranny is fine?
 
  #15  
Old 12-02-2011, 07:34 AM
Z1Motorsports's Avatar
Banned
iTrader: (8)
Join Date: Jan 2007
Location: Carrollton, GA
Posts: 2,383
Received 69 Likes on 55 Posts
Clutch without a doubt, our transmissions don't fail like that anyway. The only real issue you will have with a G/Z Transmission is bad syncros (unless you powershift into 3rd with +500ft-lb ) SP made 1248rwhp through their stock Z Transmission.

-Rob
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: 04 6MT clutch/tranny issue



All times are GMT -4. The time now is 08:45 PM.