How to spot a rev up engine *PICS*
Registered User
Joined: Sep 2010
Posts: 48
Likes: 2
From: Florida
My mechic states I must replace the green sensor illustrated in this picture. Do you know the name or part number. Ive been searching all night.
Good info in the first post, should help people getting replacement engines without access to the original car do compare dashes/trim/whatever.
Took me about 10 minutes, that is called a "Magnet Retarder" or "EXHAUST VALVE TIMING CONTROL MAGNET RETARDER" Looking in the FSM, it appears to be built into the valve timing control covers.
Edit, checked another parts site:
If you went to parts dept, it would be called: "CAM SPROCKET COVER & PULLEY KIT VTC" or "VTC COVER & PULLEY KIT"
Replacement part numbers are:
A3040-AC71A (RH)
A3040-AC71B (LH)
Edit, checked another parts site:
If you went to parts dept, it would be called: "CAM SPROCKET COVER & PULLEY KIT VTC" or "VTC COVER & PULLEY KIT"
Replacement part numbers are:
A3040-AC71A (RH)
A3040-AC71B (LH)
Registered User
Joined: Apr 2014
Posts: 1
Likes: 0
Hi,
i got a problem on my 2006 G35 coupe unstable engine and the code shown p0024 & p0084, but when i remove the blue plug which you circled in red the car gone smooth again looks like no problem on it.
any body know what is the solution or what is the problem.
other things what is that part effect?
Thank you
Nawar
i got a problem on my 2006 G35 coupe unstable engine and the code shown p0024 & p0084, but when i remove the blue plug which you circled in red the car gone smooth again looks like no problem on it.
any body know what is the solution or what is the problem.
other things what is that part effect?
Thank you
Nawar
Registered User
Joined: Apr 2014
Posts: 108
Likes: 3
I used the tranny/year for awhile, but never knew the big differences. I didn't see the little things. I know enough about cars to work on them, but I assumed it was all in the tune.
So question is the revup still a vq35de or is it the vq35hr? I've been confused about that.
Registered User
Joined: Jul 2022
Posts: 1
Likes: 0
It's a stock vq35de rev up I'm trynna find a rebuild kit for it
Does anyone know where I can buy a rebuild kit for a 2005 G35 rev up engine I been looking but can't seem to find any for the rev up engines a little help I new to these vq platform
BANNED!!!
Joined: May 2017
Posts: 14,837
Likes: 2,497
From: Washington State
Coupe 6MT Premium RAS
You can buy the complete gasket kit from your local Nissan, same with the timing chain kit, water pump, oil pump. Piston/rods/bearings there's a ton of options.
Or you can buy a complete kit from a G/Z vendor like Concept Z Performance or Z1 Motorsports.
Or you can buy a complete kit from a G/Z vendor like Concept Z Performance or Z1 Motorsports.
Registered User
Joined: Sep 2013
Posts: 196
Likes: 3
Ok guys....after doing my research and alot of looking, I finally had the chance to view these two cars sitting next to each other. And i got pics this time to prove it.
The Rev up motor with 298hp has variable cam timing on the exhaust side as well as the intake side. The non-rev up motor with 280hp only has it on the intake side. So to put this to rest once and for all....here is the easiest way to tell.
The Rev up motor with 298hp has variable cam timing on the exhaust side as well as the intake side. The non-rev up motor with 280hp only has it on the intake side. So to put this to rest once and for all....here is the easiest way to tell.
Thread
Thread Starter
Forum
Replies
Last Post
baker2795
Engine, Drivetrain & Forced-Induction
3
Sep 2, 2015 06:00 PM
