P0011 cel/mil?
#1
P0011 cel/mil?
I just had my code ran and it was a P0011 Camshaft position actuator A. Bank 1 timing.
I replaced the sensor b/c previously I had the code that was for this sensor specifically, don't remember what it was but Infiniti told me it needed to be replaced.
The troubleshooting for this error is to replace the crank position sensor or the cam position sensor. Should I go ahead and order the crank position sensor or try resetting the error code again to see if it stays away?
I replaced the sensor b/c previously I had the code that was for this sensor specifically, don't remember what it was but Infiniti told me it needed to be replaced.
The troubleshooting for this error is to replace the crank position sensor or the cam position sensor. Should I go ahead and order the crank position sensor or try resetting the error code again to see if it stays away?
#3
I replaced the sensor and reset the ecu by disconnecting the battery and then the error code in the op showed up. Did u not read the op? It already says I replaced the sensor lol
#4
#5
#7
Trending Topics
#10
#12
#13
It had to do something with the timing chain covers, so whichever oil passages can be blocked by too much RTV when reinstalling the covers. They also replaced the cam gears, which they said also contributed to the rattle but they have nothing to do with the oil system. They're clutch style, if I remember correctly.
#14