Engine, Drivetrain & Forced-Induction Have Technical Questions or Done Modifications to the G35? Find out the answer in here! (View All Posts)

New Here!! Need Help! Engine won't start! Runs rough with low rpm

Thread Tools
 
Search this Thread
 
Rate Thread
 
  #1  
Old 08-25-2013, 11:17 PM
ChrisKG35's Avatar
Registered User
Thread Starter
Join Date: Aug 2013
Location: Miami
Posts: 595
Received 37 Likes on 31 Posts
Angry New Here!! Need Help! Engine won't start! Runs rough with low rpm

Hey guys im new here, im seeking help as my engine with a 6MT tranny isn't starting and running low RPM (200 and leads to stall). I have a feeling it has something to do with fuel pressure but i've gone insane looking around forums trying to find out how to test it. The starter, battery, and alternator are good so those aren't contributors, also there are NO engine codes. I notice that early in the morning when it is, well less humid and hot here in Miami, the engine will hard start but none the less start. I have to keep on the gas to keep it from stalling but it will stay on. BUT if i let it die it and the engine is warm, it won't start up. What do I do?

IMPORTANT SIDE NOTE** I also have a tapping noise but was told from family friend and infiniti mechanic that it is lifter noise, what should I do.
Thanks!

EDIT** Car has 49k Miles, If rev'd past around 3k engine will lose fuel pressure (what I believe) and begin to die. Could this be a fuel problem??
 

Last edited by ChrisKG35; 08-26-2013 at 11:14 PM.
  #2  
Old 08-25-2013, 11:32 PM
herrschaft's Avatar
Registered User
iTrader: (18)
Join Date: Jul 2009
Location: Coast
Posts: 7,738
Received 770 Likes on 604 Posts
See if the throttle body needs to be cleaned and ensure the oil is topped off.
 
The following users liked this post:
ChrisKG35 (08-27-2013)
  #3  
Old 08-26-2013, 12:42 AM
ChrisKG35's Avatar
Registered User
Thread Starter
Join Date: Aug 2013
Location: Miami
Posts: 595
Received 37 Likes on 31 Posts
will do thanks!
 
  #4  
Old 08-26-2013, 11:13 PM
ChrisKG35's Avatar
Registered User
Thread Starter
Join Date: Aug 2013
Location: Miami
Posts: 595
Received 37 Likes on 31 Posts
BUMP! Any advice on lifter noise? Autozone recommended an Additive
 
  #5  
Old 08-27-2013, 12:31 AM
faiz23's Avatar
Registered User
iTrader: (2)
Join Date: Nov 2006
Location: Your mom's bed
Posts: 2,198
Received 290 Likes on 218 Posts
video of said noise. Typically you need shim buckets to adjust for the gap and get rid of the noise. 6mt tends to chatter as well from the flywheel and a video would be nice.
 
The following users liked this post:
ChrisKG35 (08-27-2013)
  #6  
Old 08-27-2013, 02:03 AM
6mtg's Avatar
Registered User
iTrader: (1)
Join Date: Aug 2012
Location: Valdosta Georgia
Posts: 339
Received 14 Likes on 12 Posts
you can test fuel just by standing out and shooting starting fluid up the intake tube if it keeps running with a burst of starting fluid then you know its a fuel problem. We do have some what of a problem with fuel pumps so it could be the issue. As for the tapping faiz23 is corrrect about the shims.
 
The following users liked this post:
ChrisKG35 (08-27-2013)
  #7  
Old 08-27-2013, 10:18 AM
ChrisKG35's Avatar
Registered User
Thread Starter
Join Date: Aug 2013
Location: Miami
Posts: 595
Received 37 Likes on 31 Posts
Okay thanks for the input guys! Cleaning the TB today, hopefully it corrects the RPM issue. Ill try to post a video today for you Faiz and gunna try the starter fluid also 6MTG. Will update soon
 
  #8  
Old 08-28-2013, 04:06 PM
Tolboothwilley™'s Avatar
Former G35driver Vendor
iTrader: (37)
Join Date: Mar 2012
Location: Las Vegas
Posts: 1,081
Received 71 Likes on 60 Posts
um, the fuel pumps VERY RARELY have problems - I wouldnt start with that. Its more likely to be a vacuum leak somewhere. Especially with only 49K miles.
 
  #9  
Old 08-28-2013, 05:44 PM
ChrisKG35's Avatar
Registered User
Thread Starter
Join Date: Aug 2013
Location: Miami
Posts: 595
Received 37 Likes on 31 Posts
Well I forgot to mention the car was sat for 5 years before I purchased it, soo i'm thinking fuel problem too
 
  #10  
Old 08-28-2013, 06:02 PM
ChrisKG35's Avatar
Registered User
Thread Starter
Join Date: Aug 2013
Location: Miami
Posts: 595
Received 37 Likes on 31 Posts
RPM is corrected!! now have to diagnose the ticking and why the car is dying if I keep revs too high or or don't rev at all.....
 
  #11  
Old 09-08-2013, 07:11 PM
ChrisKG35's Avatar
Registered User
Thread Starter
Join Date: Aug 2013
Location: Miami
Posts: 595
Received 37 Likes on 31 Posts
Originally Posted by faiz23
video of said noise. Typically you need shim buckets to adjust for the gap and get rid of the noise. 6mt tends to chatter as well from the flywheel and a video would be nice.

Here is the video sorry I took so long
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
joedaddy1
Engine, Drivetrain & Forced-Induction
0
07-28-2015 02:58 PM
newg37
G35 Coupe V35 2003 - 07
1
07-26-2015 09:32 AM
ClwMike
G35 Sedan V35 2003-06
7
07-23-2015 12:55 PM
006
Intake & Exhaust
10
07-19-2015 04:30 PM
Jadenkid22
G35 Coupe V35 2003 - 07
0
07-14-2015 12:33 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: New Here!! Need Help! Engine won't start! Runs rough with low rpm



All times are GMT -4. The time now is 04:35 PM.