FS: Vortech Bypass Valve Filter
#1
Vortech Bypass Valve Filter
* * * * * ALL ITEMS HAVE BEEN SOLD * * * * *
For sale is an unused Vortech bypass valve filter.
Bypass Valve Filter
This is the filter people use to quiet down the Vortech bypass valve. Its also useful for keeping debris out of the bypass valve if you run the car N/A (for instance, on a long road trip). I bought this when I bought my kit but completely forgot I had it - its been sitting in my vortech stuff box since then so its basically new. The price is $20 shipped. and yes, it comes with a clamp* * * * * S O L D * * * * *
Jackshaft Assembly
Includes the full jackshaft assembly - housing, bearings, the actual jackshaft, etc. Works great and all of the visible surfaces have been polished. I bought this when I had my original jackshaft serviced to reduce downtime. The price is $150 shipped. Vortech sells the full assembly for a few hundred bucks so save some money if you need to replace yours. * * * * * S O L D * * * * *
Polished GTM 2.87" pulley
The front face has been polished, the grooves have been sandblasted to increase grip, and the rear face has already been modified to clear the jackshaft. Ready to bolt on. The price is $100 shipped. * * * * * S O L D * * * * *
Cog Pulley
This is the 32-tooth cog pulley that goes on the jackshaft. All faces have been polished. Price is $50 shipped. * * * * * S O L D * * * * *
Gates Cog Belt
Gates cog belt #6008MGT20 - this is the belt used with the stock setup for non-revup kits. This is a spare belt I bought last year, but an extra one was included when I replaced my cog pulley. Price is $15 shipped. * * * * * S O L D * * * * *
Cold Air Intake
I ran this setup on my G35 for about 5,000 miles. It works fine, but I moved my tranny cooler (again) so I have to sell it. I cleaned and oiled the filter after I pulled it off the car. The price is $50 shipped. * * * * * S O L D * * * * *
For sale is an unused Vortech bypass valve filter.
Bypass Valve Filter
This is the filter people use to quiet down the Vortech bypass valve. Its also useful for keeping debris out of the bypass valve if you run the car N/A (for instance, on a long road trip). I bought this when I bought my kit but completely forgot I had it - its been sitting in my vortech stuff box since then so its basically new. The price is $20 shipped. and yes, it comes with a clamp* * * * * S O L D * * * * *
Jackshaft Assembly
Includes the full jackshaft assembly - housing, bearings, the actual jackshaft, etc. Works great and all of the visible surfaces have been polished. I bought this when I had my original jackshaft serviced to reduce downtime. The price is $150 shipped. Vortech sells the full assembly for a few hundred bucks so save some money if you need to replace yours. * * * * * S O L D * * * * *
Polished GTM 2.87" pulley
The front face has been polished, the grooves have been sandblasted to increase grip, and the rear face has already been modified to clear the jackshaft. Ready to bolt on. The price is $100 shipped. * * * * * S O L D * * * * *
Cog Pulley
This is the 32-tooth cog pulley that goes on the jackshaft. All faces have been polished. Price is $50 shipped. * * * * * S O L D * * * * *
Gates Cog Belt
Gates cog belt #6008MGT20 - this is the belt used with the stock setup for non-revup kits. This is a spare belt I bought last year, but an extra one was included when I replaced my cog pulley. Price is $15 shipped. * * * * * S O L D * * * * *
Cold Air Intake
I ran this setup on my G35 for about 5,000 miles. It works fine, but I moved my tranny cooler (again) so I have to sell it. I cleaned and oiled the filter after I pulled it off the car. The price is $50 shipped. * * * * * S O L D * * * * *
Last edited by bigc; 05-23-2013 at 09:51 PM. Reason: added some items
Trending Topics
#8
#9
#10
#11
#12
#15
You don't need one as it routes to the front tire and gets ambient air from the bumper opening. At least mines does and it looks similar.