FS: 03-04 Sedan Rear Valance Lip Nismo Aero Kit
#1
Join Date: Mar 2008
Location: Boston
Posts: 311
Likes: 0
Received 0 Likes
on
0 Posts
03-04 Sedan Rear Valance Lip Nismo Aero Kit
Up for grabs is a brand new, never painted, never installed Nismo Aero Kit rear lip.
First the good: The one piece everyone needs, brand new.
Onto the bad: It is pretty bruised and battered from laying around for the past few years. It comes with no hardware either. Pics show damage, nothing unfixable.
Firm price is set at $300 shipped to you door, including PP fees or $250 if you pick up with cash. Location is southeastern MA
First the good: The one piece everyone needs, brand new.
Onto the bad: It is pretty bruised and battered from laying around for the past few years. It comes with no hardware either. Pics show damage, nothing unfixable.
Firm price is set at $300 shipped to you door, including PP fees or $250 if you pick up with cash. Location is southeastern MA
#2
What part of the rear lip does this picture illustrate? Can't quite make it out.
Also, I thought these came prepainted? Is this an original nissan part? Polyurethane and not fiberglass?
Thanks,
rob g.
Also, I thought these came prepainted? Is this an original nissan part? Polyurethane and not fiberglass?
Thanks,
rob g.
#3
Join Date: Mar 2008
Location: Boston
Posts: 311
Likes: 0
Received 0 Likes
on
0 Posts
Yah it is OEM...that pic looks like the part right above the exhaust
Need Paypal so if someone covers the Paypal fees, I will sell for $250 shipped if someone buys this within the next 48 hours
Need Paypal so if someone covers the Paypal fees, I will sell for $250 shipped if someone buys this within the next 48 hours
#5
ill Sedan
iTrader: (87)
Are you positive this is an OEM Nismo Rear lip and not the one made by VIS? I only ask because all of these came prepainted from the factory and the bottom portion of the lip is a black plastic finish. Looks like the one you have is painted all the same color.
#6
Can you provide that info TP16?
Thanks,
rob g.
#7
ill Sedan
iTrader: (87)
Another easy way to tell if its authentic is for the OP to test fit it on his car (just hold it in place). The VIS one was made to fit the JDM shorty rear bumper, so its 1-1.5" too short.
Trending Topics
#9
ill Sedan
iTrader: (87)
JDM Shorty bumper
USDM
The USDM sticks out further likely to comply with US impact laws.
http://www.nhtsa.gov/Cars/Problems/s...per/Index.html
USDM
The USDM sticks out further likely to comply with US impact laws.
http://www.nhtsa.gov/Cars/Problems/s...per/Index.html
#10
Oh, I see. Yep that would be a problem. I'm interested in this piece, but need to verify that it's the real deal and it fits.
Thanks,
rob g.
Thanks,
rob g.
#11
I'm almost certain this is not from VIS. VIS rear has the license plate indent in the middle, which I believe is also present on the JDM version.
Here's how VIS rear is short on each side as CandlestickPark mentioned:
License plate indent in the middle section:
OP maybe you want to snap some pics from the inside, so we see the mounts are there, which will help you sell this piece.
Here's how VIS rear is short on each side as CandlestickPark mentioned:
License plate indent in the middle section:
OP maybe you want to snap some pics from the inside, so we see the mounts are there, which will help you sell this piece.
#12
Join Date: Mar 2008
Location: Boston
Posts: 311
Likes: 0
Received 0 Likes
on
0 Posts
I can gauantee this is the real thing. The above poster who seems to think this is painted fully is incorrect. This piece has never been painted. The second picture clearly shows no license plate cut out. PqBrown, that indent is on the lower left about where the rear bumper would start. I am out right now, but when I get home I will get info on the part number and take a couple other pictures. If there are any other questions or concearns, lmk
#15
Join Date: Mar 2008
Location: Boston
Posts: 311
Likes: 0
Received 0 Likes
on
0 Posts
What? Are you asking me or telling me?