Crawford Headers Installed!
#1
![Arrow](https://g35driver.com/forums/images/icons/icon2.gif)
I had my Crawford Headers and High Flow Cats installed at Lokey yesterday. The installation was very smooth and everything seems to be working perfectly. Big thanks to Jon Oliva, Vince, and Christian of Lokey for arranging everything, and especially to Christian for doing the actual installation.
I am very happy with the headers and HFCs... The engine idle tone is a bit lower and throatier and the overall sound gets better as the RPMs climb. I haven't really run it hard yet, but headers are a sweet mod. They seem to have improved the midrange powerband quite a bit.
I took a few pictures that some of you might be interested in. I didn't take any during the actual installation as I used one of Lokey's Loaner Cars (2007 Sedan) and went back to work.
Here's a shot of the headers before installation. Crawford offers an option to get the Jet-Hot coating along with the headers. I opted for the 1300 degree coating that Doug recommended.
![](http://i15.photobucket.com/albums/a361/___jb/My%20G35/Headers%20HFC/CrawfordHeaders10923.jpg)
I don't know how many of you have talked to Doug Crawford, but he's really a character. I asked about some of Jet-Hot's coatings that are higher than 1300 degrees and he laughed... He said any heat over 1300 degrees would melt the front of my car off... Hahaha...
![](http://i15.photobucket.com/albums/a361/___jb/My%20G35/Headers%20HFC/CrawfordHeaders20927.jpg)
Picture of the Cats... This one has an extra bung for a UTEC Tuner Kit or O2 probe...
![](http://i15.photobucket.com/albums/a361/___jb/My%20G35/Headers%20HFC/CrawfordHeaders30938.jpg)
Inside the cat... I wiped the shavings out before putting this cat on...
![](http://i15.photobucket.com/albums/a361/___jb/My%20G35/Headers%20HFC/CrawfordHeaders40951.jpg)
And here's my best picture of the installed headers. You can see a few tubes, but that's about it.
![](http://i15.photobucket.com/albums/a361/___jb/My%20G35/Headers%20HFC/CrawfordHeaders51086.jpg)
That's it!
I am very happy with the headers and HFCs... The engine idle tone is a bit lower and throatier and the overall sound gets better as the RPMs climb. I haven't really run it hard yet, but headers are a sweet mod. They seem to have improved the midrange powerband quite a bit.
I took a few pictures that some of you might be interested in. I didn't take any during the actual installation as I used one of Lokey's Loaner Cars (2007 Sedan) and went back to work.
Here's a shot of the headers before installation. Crawford offers an option to get the Jet-Hot coating along with the headers. I opted for the 1300 degree coating that Doug recommended.
![](http://i15.photobucket.com/albums/a361/___jb/My%20G35/Headers%20HFC/CrawfordHeaders10923.jpg)
I don't know how many of you have talked to Doug Crawford, but he's really a character. I asked about some of Jet-Hot's coatings that are higher than 1300 degrees and he laughed... He said any heat over 1300 degrees would melt the front of my car off... Hahaha...
![](http://i15.photobucket.com/albums/a361/___jb/My%20G35/Headers%20HFC/CrawfordHeaders20927.jpg)
Picture of the Cats... This one has an extra bung for a UTEC Tuner Kit or O2 probe...
![](http://i15.photobucket.com/albums/a361/___jb/My%20G35/Headers%20HFC/CrawfordHeaders30938.jpg)
Inside the cat... I wiped the shavings out before putting this cat on...
![](http://i15.photobucket.com/albums/a361/___jb/My%20G35/Headers%20HFC/CrawfordHeaders40951.jpg)
And here's my best picture of the installed headers. You can see a few tubes, but that's about it.
![](http://i15.photobucket.com/albums/a361/___jb/My%20G35/Headers%20HFC/CrawfordHeaders51086.jpg)
That's it!
#3
#5
Originally Posted by Demonteverde
Thats really nice _jb. I told you Christian is a pro at installing those headers on our G's and its always nice to get a loaner car while your car is up on the lift. Next stop, UTEC at peformance factory?
Next step will hopefully be to get Jeremy to tune it with either a UTEC or Osiris. I don't know if he ever plans to do anything with Osiris or not, or if he thinks a UTEC is better.
Originally Posted by escobar929
now its utec time!!!
looks great! say good bye to your gas cause you're always gonna wanna floor it all the time
looks great! say good bye to your gas cause you're always gonna wanna floor it all the time
#7
Trending Topics
#11
Originally Posted by 98intrigue
I want to hear it tomorrow!
Originally Posted by chobble19
nice! i have been thinking of getting headers myself but im not sure which ones to get?
I'm hoping the Jet-Hot coating will help with the clutch fluid. I suspect that's why Crawford started offering it as an option. Having Lokey install them relieved my mind on the difficult installation part. If anyone can deal with difficult G35 installations, it's Lokey. So, I decided to spend the extra money on the Crawfords.
Originally Posted by w0ady
congrats john! im sure that rev-up engine is loving the mods. cant wait to see what jeremy can get out of it with the utec.
I'm curious to see, too!
Originally Posted by HYDROERIC2003
looks good homie
Originally Posted by pullover20
congrats jb another sick mod