Forced Induction Discussion of turbos , superchargers , and nitrous upgrades on the G35

Greddy TT on Rev-Up w/ stock internals

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Jul 12, 2006 | 03:25 PM
  #31  
Dr_jitsu's Avatar
Thread Starter
|
Registered User
Joined: May 2006
Posts: 432
Likes: 0
From: Texas
Thanks, Gman...so, what is your opinion of SGP?
EDit: Nevermind, saw your other post. So, should I fork out another 2k for the V-pro...the IS is brand new and supposedly very good
 

Last edited by Dr_jitsu; Jul 12, 2006 at 03:32 PM.
Reply
Old Jul 12, 2006 | 03:41 PM
  #32  
Gman2004's Avatar
Registered User
Joined: Sep 2004
Posts: 1,844
Likes: 0
From: Miami, FL
Originally Posted by Dr_jitsu
Thanks, Gman...so, what is your opinion of SGP?
EDit: Nevermind, saw your other post. So, should I fork out another 2k for the V-pro...the IS is brand new and supposedly very good
I don't know about the IS, but I would trust Mark. He wouldn't recommend a POS.
 
Reply
Old Jul 12, 2006 | 03:52 PM
  #33  
Dr_jitsu's Avatar
Thread Starter
|
Registered User
Joined: May 2006
Posts: 432
Likes: 0
From: Texas
He is big on the brand new IS....can I ask, how many whp were you running when you damaged internals (w/ EU)?
 
Reply
Old Jul 12, 2006 | 04:06 PM
  #34  
Gman2004's Avatar
Registered User
Joined: Sep 2004
Posts: 1,844
Likes: 0
From: Miami, FL
543whp
 
Reply
Old Jul 12, 2006 | 04:37 PM
  #35  
Dr_jitsu's Avatar
Thread Starter
|
Registered User
Joined: May 2006
Posts: 432
Likes: 0
From: Texas
OK...I should be fine at 370...one last q: do I need a fuel return? They are expensive!

Does the APS come w/ a fuel return?
 
Reply
Old Jul 12, 2006 | 04:39 PM
  #36  
GZire's Avatar
Registered User
Joined: Jun 2004
Posts: 3,387
Likes: 23
From: Hawaii
Originally Posted by Gman2004
543whp
Forkin A!!!
 
Reply
Old Jul 12, 2006 | 04:44 PM
  #37  
Gman2004's Avatar
Registered User
Joined: Sep 2004
Posts: 1,844
Likes: 0
From: Miami, FL
sorry guys 543whp was on the 2nd motor (built). the stock block bent a rod at like 350whp while on the dyno because of the dik tuning the car.

A fuel system is ideal, but not really needed until you start upping the boost past 8psi.

The greddy tt kits comes out to the same price as the APS once you buy all the extra parts the APS brings that the greddy doesn't.
 
Reply
Old Jan 11, 2007 | 09:52 AM
  #38  
MightyMouse's Avatar
Registered User
Joined: Aug 2006
Posts: 173
Likes: 0
Here's what you really need
Boost Controller (like the Profec-B or something) this will tell you what you're boosting anyway.. ..
Turbo Timer (this will save your turbos). The APexi Turbo Timer has a built in A/F meter that gets tapped into your ECU. This kills two birds with one stone.
No need for an EGT if you have an AF meter...
OIL PRESSURE GAUGE!.. You need an actual oil pressure gauge in my opinion. The last thing you want is to lose oil pressure with a turbo setup.
Even if your engine survives the turbos will be S.O.L if you are burning oil .. .. Keep in mind that if you have too much crankcase pressure your oil will blow past your turbo seals and shoot right out of the exhaust. .. You'll burn oil quickly..

If you're running 6-7PSI I don't see why you would need anything else. The kit comes with everything else that is needed (aside from the Intercooler).
 
Reply
Old Jan 12, 2007 | 03:32 PM
  #39  
KenK2's Avatar
The Pole
iTrader: (2)
Joined: May 2006
Posts: 269
Likes: 0
From: Tucson, Az.
Dood why bring back this dead A$$ post.. He said he was buying some expensive Porsche
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
StreetStandard
Engine-Vendor
117
May 22, 2020 08:21 AM
ncg35guy
G35 Sedan V36 2007- 08
4
Sep 24, 2015 04:53 PM
G35Sask
Engine - Intake/Fuel
1
Aug 1, 2015 11:16 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 06:10 PM.