update:fixed images- Just got off the dyno with Jeremey Tibbs, Here are the results:


First run is without meth, Second is with Meth. Solid 15+hp&tq gains throughout the powerband. We had to stop there since my injectors were MAXED OUT but i think there more power in there.

Here is the overlay over my past tune with a different shop



As you can see I got some serious gains from the tune. 9psi 93 octane vs 10psi 93 octane(no meth). In some spots I pick up over 100tq:icon21: with meth its even more

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/L3ULbkLLhU0&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/L3ULbkLLhU0&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

-This is not a call out thread, there are several tuners who I feel comfortable with but wanted to try something different. I am just posting my results good and bad. Please dont derail the thread


A week ago Frank, from Hills Garage installed the Aquamist HSF1 and did an outstanding job. I was under a tight timelime line and he did an awsome job. I really appreciate clean installs and he went over and beyond in the time given. He also cleaned up some of the wiring and made sure the Utec was hanging strait down(it was at a 20 degree angle prior). I was also pleasantly surprise when i saw the bill given he did other things like an oil change, spark plugs, etc and it was extremely reasonable

Here are a few shots of the install




Due to time constraints, size of the tank, and having the Bose amp in the floor the tank was just mounted to the floor

 

I see nothing but red x,s.

 

Very clean G and great sleeper.

 

can someone school me on this setup. Meth?

 

great numbers!

what injectors are you running that you ran out of fuel?

 

crystal meth, the tuner smokes it prior to tunning it.. RA style

 

^^^

 

theres a meth tank(2.5gal), a pump, a electrical junction hookup and nozzle


basically it take voltage from the maf to trigger the injection. mine is set to turn on at 5psi

the meth helps lower IAT(inlet air temps), increase octaine levels, prevent detonation, prevent knock. ver similiar to running race gas

 

Very nice!

I still need to hook up my meth kit. It's been on the car for a year but not used. LOL

 

how much did u get this meth kit for?

 

got it used for $400 including the tank($50), its not so much the cost of the kit, install is killer takes a while-easily 8 hours theres are flow sensor, water level sensors, taping wires on maf/injectors, etc

 

Do it ASAP, problem is no ones likes to tune with it, like no one.