JZurita's Build = Performance Factory Nightmare (MUST READ)
#61
10-23-2009, 01:25 AM
Hey Julian nice to see you around the VQ community.
You and UMW350Z can take it to PM's let's keep this thread on topic.
Yes my Pro-EFI ran like **** from the get you were there to witness it
apart from that one incident I have had no issues with Junior.
He even tuned my Haltech which I'm currently running.
Apart from Julian's off the cuff personality I got nothing bad to say about the guy.
You and UMW350Z can take it to PM's let's keep this thread on topic.
Yes my Pro-EFI ran like **** from the get you were there to witness it
apart from that one incident I have had no issues with Junior.
He even tuned my Haltech which I'm currently running.
Apart from Julian's off the cuff personality I got nothing bad to say about the guy.
I hope JZ gets JT to compensated him somehow for all the shoddy work..
JZ is there any updates on the whole process? Is Vinny Ten building you a new motor or are you getting out of the game?
#62
10-23-2009, 01:33 AM
According to his post on my350z he getting out of the game.
I'm still in the game getting my parts together to do my own engine build.
I'm not going to fall into the trap of people (Shops) pointing fingers at each other and no one knows who to blame.
Spoke with Dave@Headgames today
Have to make a call to Weston Machine tomorrow
#63
10-23-2009, 01:49 AM
According to his post on my350z he getting out of the game.
I'm still in the game getting my parts together to do my own engine build.
I'm not going to fall into the trap of people (Shops) pointing fingers at each other and no one knows who to blame.
Spoke with Dave@Headgames today
Have to make a call to Weston Machine tomorrow
I'm still in the game getting my parts together to do my own engine build.
I'm not going to fall into the trap of people (Shops) pointing fingers at each other and no one knows who to blame.
Spoke with Dave@Headgames today
Have to make a call to Weston Machine tomorrow
Pick a reputable engine builder!! There are ALOT of little secrets and things that need to be done right to have a reliable engine..My new guy is from California and builds 900+HP 4 cylinder Hondas. I had him do the machine work in Cali and then assemble her in NJ. We did find that sizing the bearings properly is crucial, as well ad the end ring gap...He also found that my rod ends were on the tight side and machined those also..
Good luck!! To all and Back on topic, I appologize for the little outburst...
#64
10-26-2009, 11:17 AM
I dont think Julian really knows who is enemies are
Well perhaps your more of an antagonist, than flamist..
And for the punks b i t c h e s that want my head on a block...Come and get it, you know right where I am..
Oh and Im glad I didnt go to TTR, they f u c k e d up Rany Reys car worse than Junior did...who f u c k e d it up in the first place...
Oh and Glexs Pro-EFI ran like s h i t also from his tooner...
And for the punks b i t c h e s that want my head on a block...Come and get it, you know right where I am..
Oh and Im glad I didnt go to TTR, they f u c k e d up Rany Reys car worse than Junior did...who f u c k e d it up in the first place...
Oh and Glexs Pro-EFI ran like s h i t also from his tooner...
Who is this
...This is not the real Julian
The real Julian would never use that word
Last edited by XKR; 10-26-2009 at 11:25 AM.
#65
10-27-2009, 06:25 AM
That really sucks, I would cry. Good god, if I opened up my motor and it looked like that inside I'd have a nervous breakdown. Thing is I don't see why the first shop would install built motor no. 1, in the first place especially if it looked like a used one. I'd ship it back. Is he really willing to fix everything if you bring the car down?
I wonder what the other side of the story is.
I wonder what the other side of the story is.
#66
10-27-2009, 10:08 AM
That really sucks, I would cry. Good god, if I opened up my motor and it looked like that inside I'd have a nervous breakdown. Thing is I don't see why the first shop would install built motor no. 1, in the first place especially if it looked like a used one. I'd ship it back. Is he really willing to fix everything if you bring the car down?
I wonder what the other side of the story is.
I wonder what the other side of the story is.
#68
10-29-2009, 12:56 PM
#69
10-29-2009, 05:42 PM
Thats how him and Mike got along so well.
#70
10-29-2009, 08:22 PM
Thread
Thread Starter
Forum
Replies
Last Post
Z1Motorsports
Suspension-Vendor
56
05-31-2020 01:56 PM
