Help With Invisicord!!!
#1
Help With Invisicord!!!
Okay, so I've had my Passport X50 with Mike's Mount and the Invisicord for about a year now. Worked GREAT!
About a week ago the cord popped out of the back of the powered mirror, and I thought I had put it back in the right place. Never noticed that the Detector was staying on all night.
Tried to start the car this AM and the battery was out. Had to jump it. Normally my car never stays off for longer than 8 hours or so as I'm on the road ALOT, but this weekend I hadn't started it from Saturday afternoon to Sunday night and never gave the alternator a chance to charge the battery.
So my question is does anyone know exactly what holes in the back of the plug on the mirror to put each of the Invisicord prongs into? I'm not overly technical so something like "3rd from the top on the left and 2nd from the top on the right side" would be ideal.
About a week ago the cord popped out of the back of the powered mirror, and I thought I had put it back in the right place. Never noticed that the Detector was staying on all night.
Tried to start the car this AM and the battery was out. Had to jump it. Normally my car never stays off for longer than 8 hours or so as I'm on the road ALOT, but this weekend I hadn't started it from Saturday afternoon to Sunday night and never gave the alternator a chance to charge the battery.
So my question is does anyone know exactly what holes in the back of the plug on the mirror to put each of the Invisicord prongs into? I'm not overly technical so something like "3rd from the top on the left and 2nd from the top on the right side" would be ideal.
#3
it is a 10 pin connector, UR looking for the #6 black wire with pink stripe, that is the "switched" batt+ and #8 black wire is the ground. The #5 black with red stripe is for battery all the time. Plug is oriented like this:
1-2-3-4-5
6-7-8-9-10
Connect invisicord red to the #6(black/pink) and green to #8(black)
1-2-3-4-5
6-7-8-9-10
Connect invisicord red to the #6(black/pink) and green to #8(black)
Last edited by Memphoman; 09-10-2007 at 01:47 PM.
#4
I have posted pictures of customer supplied installation pictures in my Invisicord gallery. Hope this helps.
http://invisicord.com/gallery/Nissan_Infiniti/g35_001
http://invisicord.com/gallery/Nissan_Infiniti/g35_001
Thread
Thread Starter
Forum
Replies
Last Post
PapaGalloG35s
V36 General Tech Questions
9
01-08-2008 02:02 PM
tomcatm
Audio, Video & Electronics
20
01-08-2006 09:03 AM