VDC off light staying on - Page 2 - G35Driver - Infiniti G35 & G37 Forum Discussion

#16

07-16-2010, 04:16 PM

usafdarkhorse

Registered User

Join Date: Apr 2009

Location: Knoxville, TN / Del Rio, TX

Posts: 223

Likes: 0

Received 1 Like on 1 Post

Quote:

Originally Posted by viceversa

so maybe you messed up something when you replaced the brakes? Go back re-check everything.

+10,000,000

Reply Like

#17

07-18-2010, 09:40 PM

surma884

Registered User

Join Date: Sep 2009

Posts: 249

Likes: 0

Received 2 Likes on 2 Posts

Quote:

Originally Posted by frank358fr

I replace my spark plug. So I unplug the connector from the throttle body and every other little connector WITHOUT unpluging the battery. Do you think it might be the problem? Do I need to make a reset of the ECU and do you think Ineed to re-do the throttle learning procedures again?
Let me know
Thanks!

Leave your battery unplugged for 20 mins. Just disconnect the negative terminal. Then plug it back in after 20 mins. The ECU should loose all the settings.

I just cleaned my Mass Air Flow Sensor and Throttle Body today. I was reading the DIY on cleaning the TB and they said don't unplug the TB connector. But someone said that if you unplug it you can do the re-learn steps for the ECU, or you can leave the battery unplugged for 20 minutes.

I had to unplug it because the TB cleaner said not to get it on plastic or paint. I didn't want to risk it. So before I disconnected the TB, I unplugged the battery. It took be about 30 minutes to clean the TB. I put everything back, and hooked up the battery last. I turned it on and no problems.

Reply Like

#18

07-18-2010, 09:44 PM

walshtj

Registered User

iTrader: (12)

Join Date: Feb 2010

Location: Charlotte NC

Posts: 2,998

Likes: 5

Received 38 Likes on 38 Posts

I would unplug your battery or do the ECU reset procedure...

Reply Like

#19

07-19-2010, 11:35 AM

frank358fr

Registered User

Thread Starter

Join Date: Jun 2010

Posts: 48

Likes: 0

Received 1 Like on 1 Post

Quote:

Originally Posted by surma884

But someone said that if you unplug it you can do the re-learn steps for the ECU, or you can leave the battery unplugged for 20 minutes.

Can you explain me how to make the re-learn steps?
Thanks!

Reply Like

#20

07-19-2010, 12:41 PM

viceversa

Registered User

iTrader: (27)

Join Date: Jun 2008

Location: SAN DIEGO

Posts: 2,227

Likes: 6

Received 23 Likes on 18 Posts

Quote:

Originally Posted by frank358fr

Can you explain me how to make the re-learn steps?
Thanks!

http://lmgtfy.com/?q=350z+g35+ecu+re...eset+procedure

Reply Like

#21

04-29-2011, 04:52 PM

CHAMUKO

Registered User

Join Date: Sep 2010

Posts: 43

Likes: 0

Received 1 Like on 1 Post

I have the same problem! My vdc off light is always on!switch doesn't do anything!I'm wondering if the previous owner did a mod on it??

Reply Like

#22

04-29-2011, 05:25 PM

stevenpiazza

Registered User

Join Date: Mar 2010

Posts: 14

Likes: 0

Received 0 Likes on 0 Posts

i had the vdc off/slip lights on for a while. changed my brake pads and it was fine. also got my mechanic to clean my throttle body. no lights have come on for the past 2 weeks after the brake change

Reply Like

#23

04-30-2011, 12:36 AM

coupetech

Registered User

iTrader: (4)

Join Date: Oct 2005

Location: jersey

Posts: 100

Likes: 0

Received 1 Like on 1 Post

when u disconnect the battery and the vdc/abs/slip light(s) come on you have to recalibrate the steering angle sensor, and sometimes the decel G sensor. Only way to do it properly is w/ consult 2 or 3 at the dealer.

Reply Like

#24

08-07-2011, 10:49 PM

Zagimcheema

Registered User

Join Date: Aug 2011

Posts: 2

Likes: 0

Received 0 Likes on 0 Posts

Vdc off light on

My VDC off light came on and its not going away! I shut the car off drove it for 30 miles and everything but even when I restart the car the light is still there what do I do? The button does not do anything.

Reply Like