Im about to order some tein s-techs and want to know if i will need a camber kit or not? any help is much appreciated

 

Yes. I'm on 350Z S-Techs, SPC rear camber arms and Kinetix front upper A arms.

 

dont the 350z s-techs have a lower drop than g35 s techs?

 

Z s-techs drop a tad lower, but it has much better spring rates. It's also a nice drop for springs.

Your car maybe different, but for me, anything lower than stock takes me out of spec camber wise.

 

okay would i just need a rear camber kit or a front too?

 

I would do it right and get F&R. Make sure the rear camber kit comes with "toe bolts".

 

I did the rear camber arms & springs at the same time, got it aligned and my fronts were about .5 degree out. Then did the front arms

As far as the drop, the front came down perfect IMO, the rear didn't come down as much as it should have, ended up cutting about 10mm off of rear spring mount.

 

SPC kit 72050 will come with toe bolts. These are very well made arms.

 

Perfect thanks for all the info

 

Sure thing.