Low RPM During Idle After 5/16 Spacer Install
#1
Low RPM During Idle After 5/16 Spacer Install
After installing my 5/16 motordyne spacer l the RPM seem to be lower during idle. There are no audible leaks and all the hoses are very snug. The car does seems to be more responsive when driving but the idle is so low that you can't even hear hardly hear the car.
A/C was off but turned on it would go up by just a bit and the motor was warm. I do not remember it being this low before I installed the spacer since it was much much louder
A/C was off but turned on it would go up by just a bit and the motor was warm. I do not remember it being this low before I installed the spacer since it was much much louder
Last edited by G35Tdot; 01-18-2015 at 12:26 AM.
#4
#6
I now just remember as I was trying to put the intake back on I did slip and hit the outside of the throttle body a couple of times. Other than that I didn't touch it. Yea, I think I'm going to give it a week or so to see if it improves then I'll restart the ecu
#7
Trending Topics
#13
#14
Yup checked them all, they were all snug. Yea removing the negative cable was the first thing I did. Wasn't too happy about my radio presets being reset but it was worth it. Idle when engine is cold seems normal though going to wait a bit then do a throttle relearn