OEM Coupe 19"s painted Graphite
#1
OEM Coupe 19"s painted Graphite (PICS!)
Finally finished painting the Coupe 19s.. im very happy with the way it turned out. Sorry for the crap pics, the only Digi cam I have is my phone. Ill take some better ones once the Brembos are on.
I used all Duplicolor products
sand 250
2 coats, primer, wetsand 600
2 coats black wheel paint
3 coats graphite wheel paint
3 coats clear, wet sand 1500
I used all Duplicolor products
sand 250
2 coats, primer, wetsand 600
2 coats black wheel paint
3 coats graphite wheel paint
3 coats clear, wet sand 1500
Last edited by Fabrikator; 10-07-2008 at 02:06 PM.
#2
ill Sedan
iTrader: (87)
#3
#5
Originally Posted by G Sedan
very clean look! I think you should've left the infiniti logo chrome though. you could've dremeled out the tabs of the infiniti symbol from the back and the glued them back on after. Very good job on the paint nonetheless!
Thanks for the compliment
#7
Trending Topics
#9
#10
one of the things I really like about the rays 19s is the finish is very eye-catching when clean and rolling in the sun--nice, reflective blade-effect.
However, you did a great job and it surprisingly looks good. I would not do this unless my rays were all scuffed and then it would be a no-brainer. However, I would still buy an OEM colored set to switch back and forth.
However, you did a great job and it surprisingly looks good. I would not do this unless my rays were all scuffed and then it would be a no-brainer. However, I would still buy an OEM colored set to switch back and forth.
#11
Originally Posted by Texan1
...I would not do this unless my rays were all scuffed and then it would be a no-brainer. .
you can still kind of see the a bit of the curbage on the lower left.. but alot better than before considering almost half the diameter of the lip was curbed.
#12
#13
#14