Calling all "X's" with a lowered suspension! - Page 4 - G35Driver - Infiniti G35 & G37 Forum Discussion

Go Back  G35Driver - Infiniti G35 & G37 Forum Discussion > General Discussion > G35 Sedan V35 2003-06
Reload this Page >

Calling all "X's" with a lowered suspension!

G35 Sedan V35 2003-06 Discussion about the 1st Generation V35 G35 Sedan

Calling all "X's" with a lowered suspension!

  #46  
Old 07-13-2006, 08:46 PM
Registered User
iTrader: (3)
Join Date: Aug 2005
Location: PDX/Oakland
Posts: 533
Thanks: 0
Thanked 0 Times in 0 Posts
Originally Posted by mikeee2
Will this rear camber kit fit our X's?

http://www.prosuspension.com/product...roducts_id=438

It doesn't seem too pricey if it can fix the rear negative cambers and toe issue.
or how about stillen's? kinda pricey but anybody have another suggestion? I put toyos on mine...most i;ve spent on tires so i'd like to get my neg camber fixed.
 
  #47  
Old 07-13-2006, 08:51 PM
Registered User
iTrader: (3)
Join Date: Aug 2004
Location: New York
Posts: 1,707
Thanked 4 Times in 4 Posts
Originally Posted by G-Mony
or how about stillen's? kinda pricey but anybody have another suggestion? I put toyos on mine...most i;ve spent on tires so i'd like to get my neg camber fixed.
Any pictures of your car? What springs did you use?

Instead of going with the camber kit to correct the problem, I will be swapping out the rear z springs with g coupe springs to bring it a little higher and see if the camber comes back to closer specs and avoid the camber kit.
 
  #48  
Old 07-13-2006, 09:05 PM
Registered User
iTrader: (3)
Join Date: Aug 2005
Location: PDX/Oakland
Posts: 533
Thanks: 0
Thanked 0 Times in 0 Posts
pics coming soon! car in the shop now getting unrevised 350z springs installedl and they say i need the camber kit. might just do it if it'll fix...rather than look around for coupe springs. is it just the 350z springs that get the neg camber? how bout the tein guys?
 

Last edited by G-Mony; 07-13-2006 at 09:10 PM.
  #49  
Old 07-13-2006, 09:54 PM
Registered User
Thread Starter
iTrader: (2)
Join Date: Feb 2005
Location: Central Jersey
Posts: 1,667
Thanks: 0
Thanked 0 Times in 0 Posts
Originally Posted by G-Mony
pics coming soon! car in the shop now getting unrevised 350z springs installedl and they say i need the camber kit. might just do it if it'll fix...rather than look around for coupe springs. is it just the 350z springs that get the neg camber? how bout the tein guys?
what camber kit are you using?
 
  #50  
Old 07-15-2006, 10:54 PM
Registered User
Thread Starter
iTrader: (2)
Join Date: Feb 2005
Location: Central Jersey
Posts: 1,667
Thanks: 0
Thanked 0 Times in 0 Posts
ok...just got it back. Here are the specs. Let me know what you guys think.

Front Left(Before): Front Left(After):
Camber: -1.5----------------Camber: -1.6
Caster: 7.6------------------Caster: 7.6
Toe: -.21-------------------Toe: .06
SAI: 6.0---------------------SAI: 6.1
Included Angle: 4.5--------- Included Angle: 4.5


Front Right(Before): Front Right(After):
Camber: -1.5---------------Camber: -1.4
Caster: 6.9-----------------Caster: 6.9
Toe: .02--------------------Toe: .07
SAI: 6.1--------------------SAI: 6.0
Included Angle: 4.6---------Included Angle: 4.6

Front(Before): Front(After):
Cross Camber: 0.0-------------Cross Camber: -.02
Cross Caster: .6 --------------Cross Caster: .6
Cros SAI: -.1------------------Cros SAI: 0.0
Total Toe: -.20 ---------------Total Toe: .13


Rear Left(Before): Rear Left(After):
Camber: -2.6 ---------------Camber: -2.2
Toe: .28 --------------------Toe: .15


Rear Right(Before): Rear Right(After):
Camber: -2.2---------------Camber: -1.5
Toe: .05 -------------------Toe: .12

Rear(Before): Rear(After):
Cross Camber: -.3-----------Cross Camber: -.6
Total Toe: .32---------------Total Toe: .28
Thrust Angle: .11------------Thrust Angle: .02
 
  #51  
Old 07-17-2006, 11:39 PM
Registered User
iTrader: (2)
Join Date: Apr 2006
Posts: 33
Thanks: 0
Thanked 0 Times in 0 Posts
So theres no safe answer to lower an X ?!

So am I going to hurt my suspension by throwing on Z-Springs (Un-Revised)? I have an opportunity to get the Z-Shocks as well, should I try those in the rear? I want to lower my car without losing any performance.
 
  #52  
Old 07-18-2006, 08:06 PM
Registered User
iTrader: (3)
Join Date: Aug 2005
Location: PDX/Oakland
Posts: 533
Thanks: 0
Thanked 0 Times in 0 Posts
Originally Posted by KrazyEd
ok...just got it back. Here are the specs. Let me know what you guys think.

Front Left(Before): Front Left(After):
Camber: -1.5----------------Camber: -1.6
Caster: 7.6------------------Caster: 7.6
Toe: -.21-------------------Toe: .06
SAI: 6.0---------------------SAI: 6.1
Included Angle: 4.5--------- Included Angle: 4.5


Front Right(Before): Front Right(After):
Camber: -1.5---------------Camber: -1.4
Caster: 6.9-----------------Caster: 6.9
Toe: .02--------------------Toe: .07
SAI: 6.1--------------------SAI: 6.0
Included Angle: 4.6---------Included Angle: 4.6

Front(Before): Front(After):
Cross Camber: 0.0-------------Cross Camber: -.02
Cross Caster: .6 --------------Cross Caster: .6
Cros SAI: -.1------------------Cros SAI: 0.0
Total Toe: -.20 ---------------Total Toe: .13


Rear Left(Before): Rear Left(After):
Camber: -2.6 ---------------Camber: -2.2
Toe: .28 --------------------Toe: .15


Rear Right(Before): Rear Right(After):
Camber: -2.2---------------Camber: -1.5
Toe: .05 -------------------Toe: .12

Rear(Before): Rear(After):
Cross Camber: -.3-----------Cross Camber: -.6
Total Toe: .32---------------Total Toe: .28
Thrust Angle: .11------------Thrust Angle: .02
the rear seems to be the worst....look at the post by perrg035 on camber and how his tires got chewed up w/o camber kit. mines still in the shop but ill be getting a the stillen camber kit.
 
  #53  
Old 07-19-2006, 09:26 PM
MyG onDUBS
iTrader: (2)
Join Date: Feb 2006
Location: Mass
Posts: 103
Thanks: 0
Thanked 0 Times in 0 Posts
Heres my wheels
 

Last edited by g352k6x; 08-01-2007 at 08:32 PM.
  #54  
Old 07-20-2006, 04:19 PM
Registered User
iTrader: (6)
Join Date: Jul 2005
Location: bronx,ny
Posts: 1,063
Thanks: 0
Thanked 1 Time in 1 Post
I think the coupe sport springs is a decent drop considering what we have to work with. I spoke to tanabe yesterday they are doing a G35X right now but will not be ready for another 2 to 3 months. We will just have to wait and see.
 
  #55  
Old 07-20-2006, 04:21 PM
Registered User
iTrader: (1)
Join Date: May 2005
Location: Displaced New Yorker
Posts: 2,138
Thanks: 0
Thanked 1 Time in 1 Post
^^^^^^^^^^yes!!!!! waa hoooooooo!!!
 
  #56  
Old 07-20-2006, 06:34 PM
Registered User
Join Date: Apr 2006
Posts: 171
Thanks: 0
Thanked 0 Times in 0 Posts
yaaaaaaaaaaaaaaaaaaaaaaaaaaaaay

i'm ecstatic, i'm hoping they speed it up a lil, can't wait
 
  #57  
Old 07-20-2006, 09:07 PM
Registered User
Thread Starter
iTrader: (2)
Join Date: Feb 2005
Location: Central Jersey
Posts: 1,667
Thanks: 0
Thanked 0 Times in 0 Posts
what are they gonna be making? Just springs?
 
  #58  
Old 07-23-2006, 04:55 PM
Registered User
iTrader: (3)
Join Date: Aug 2005
Location: PDX/Oakland
Posts: 533
Thanks: 0
Thanked 0 Times in 0 Posts
so finally got my car back w/ stillen rear camber kit.

1)unrevised 350z springs
2)dunno... just the right drop for me. happy i can get over my community's speed bumps w/3 peeps in the car
3)a bit harsher ride as expected, can feel more bumps in road. as far as twisties and how it handles not sure yet..
4)camber was way off as expected. got rear stillen camber kit. not sure on alignment specs yet will get from shop.
5)200miles
6)TBA
7)19" ssr Gt3s 245/40 toyo t1r

pics arent the greatest...
 
Attached Thumbnails Calling all "X's" with a lowered suspension!-img_0230.jpg   Calling all "X's" with a lowered suspension!-img_0231.jpg   Calling all "X's" with a lowered suspension!-img_0229.jpg  

Last edited by G-Mony; 08-06-2006 at 10:43 PM.
  #59  
Old 07-31-2006, 01:12 PM
Registered User
Join Date: Aug 2005
Posts: 427
Thanks: 0
Thanked 2 Times in 1 Post
just updating my post. im riding on tien h tech springs. installed end of april. i beleive my rear shocks are ready to go. i'm getting alot more bounce in the rear then before. god i hope they make some shocks or a full coilover set soon.
 
  #60  
Old 08-01-2006, 02:53 AM
Registered User
iTrader: (3)
Join Date: Aug 2005
Location: PDX/Oakland
Posts: 533
Thanks: 0
Thanked 0 Times in 0 Posts
Originally Posted by apintojr
just updating my post. im riding on tien h tech springs. installed end of april. i beleive my rear shocks are ready to go. i'm getting alot more bounce in the rear then before. god i hope they make some shocks or a full coilover set soon.
wow..how many miles you have on shocks? how many miles altogether on the car? you think its the springs that made the shocks go so fast?

reason i ask so much is im plannin on putting H-techs on and getting rid of my 350z springs..
 

Thread Tools
Search this Thread
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 3 votes, 4.33 average.

Quick Reply: Calling all "X's" with a lowered suspension!


Archive Advertising Cookie Policy Privacy Statement Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
 
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in: