or how about stillen's? kinda pricey but anybody have another suggestion? I put toyos on mine...most i;ve spent on tires so i'd like to get my neg camber fixed.

 

Any pictures of your car? What springs did you use?

Instead of going with the camber kit to correct the problem, I will be swapping out the rear z springs with g coupe springs to bring it a little higher and see if the camber comes back to closer specs and avoid the camber kit.

 

pics coming soon! car in the shop now getting unrevised 350z springs installedl and they say i need the camber kit. might just do it if it'll fix...rather than look around for coupe springs. is it just the 350z springs that get the neg camber? how bout the tein guys?

 

what camber kit are you using?

 

ok...just got it back. Here are the specs. Let me know what you guys think.

Front Left(Before): Front Left(After):
Camber: -1.5----------------Camber: -1.6
Caster: 7.6------------------Caster: 7.6
Toe: -.21-------------------Toe: .06
SAI: 6.0---------------------SAI: 6.1
Included Angle: 4.5--------- Included Angle: 4.5


Front Right(Before): Front Right(After):
Camber: -1.5---------------Camber: -1.4
Caster: 6.9-----------------Caster: 6.9
Toe: .02--------------------Toe: .07
SAI: 6.1--------------------SAI: 6.0
Included Angle: 4.6---------Included Angle: 4.6

Front(Before): Front(After):
Cross Camber: 0.0-------------Cross Camber: -.02
Cross Caster: .6 --------------Cross Caster: .6
Cros SAI: -.1------------------Cros SAI: 0.0
Total Toe: -.20 ---------------Total Toe: .13


Rear Left(Before): Rear Left(After):
Camber: -2.6 ---------------Camber: -2.2
Toe: .28 --------------------Toe: .15


Rear Right(Before): Rear Right(After):
Camber: -2.2---------------Camber: -1.5
Toe: .05 -------------------Toe: .12

Rear(Before): Rear(After):
Cross Camber: -.3-----------Cross Camber: -.6
Total Toe: .32---------------Total Toe: .28
Thrust Angle: .11------------Thrust Angle: .02

 

So am I going to hurt my suspension by throwing on Z-Springs (Un-Revised)? I have an opportunity to get the Z-Shocks as well, should I try those in the rear? I want to lower my car without losing any performance.

 

the rear seems to be the worst....look at the post by perrg035 on camber and how his tires got chewed up w/o camber kit. mines still in the shop but ill be getting a the stillen camber kit.

 

Heres my wheels

 

I think the coupe sport springs is a decent drop considering what we have to work with. I spoke to tanabe yesterday they are doing a G35X right now but will not be ready for another 2 to 3 months. We will just have to wait and see.

 

^^^^^^^^^^yes!!!!! waa hoooooooo!!!

 

yaaaaaaaaaaaaaaaaaaaaaaaaaaaaay

i'm ecstatic, i'm hoping they speed it up a lil, can't wait

 

what are they gonna be making? Just springs?

 

so finally got my car back w/ stillen rear camber kit.

1)unrevised 350z springs
2)dunno... just the right drop for me. happy i can get over my community's speed bumps w/3 peeps in the car
3)a bit harsher ride as expected, can feel more bumps in road. as far as twisties and how it handles not sure yet..
4)camber was way off as expected. got rear stillen camber kit. not sure on alignment specs yet will get from shop.
5)200miles
6)TBA
7)19" ssr Gt3s 245/40 toyo t1r

pics arent the greatest...

 

just updating my post. im riding on tien h tech springs. installed end of april. i beleive my rear shocks are ready to go. i'm getting alot more bounce in the rear then before. god i hope they make some shocks or a full coilover set soon.

 

wow..how many miles you have on shocks? how many miles altogether on the car? you think its the springs that made the shocks go so fast?

reason i ask so much is im plannin on putting H-techs on and getting rid of my 350z springs..