G35 Sedan V35 2003-06 Discussion about the 1st Generation V35 G35 Sedan

Review: Aftermarket Nismo Aero Kit for 03/04 Sedan (VIS Techno R)

Thread Tools
 
Search this Thread
 
Rate Thread
 
  #61  
Old 03-29-2011 | 01:37 AM
JaE35's Avatar
Moderator
iTrader: (37)
Joined: Jul 2010
Posts: 8,318
Likes: 802
From: DFW, TX
G35 Sedan
Premier Member
Considering just picking up the front...doesn't look bad at all
 
  #62  
Old 03-30-2011 | 01:00 AM
Lucky-G's Avatar
Registered User
iTrader: (15)
Joined: Sep 2007
Posts: 1,931
Likes: 7
From: STL, MO
Kinda with everyone else. With the limited availability of the authentic Nismo front, a replica may be the way to go. Wish I could've snagged a Rookie bumper
 
  #63  
Old 09-13-2011 | 03:34 PM
iratemetsfan04x's Avatar
Registered User
iTrader: (1)
Joined: Apr 2010
Posts: 51
Likes: 1
From: CT
I've had the nismo replica sitting in my basement for a while now. Ive decided to bring it to the shop this week got quoted for 350 . My replica is from strafe. I live in Ct and hope it holds up in the winter. I'm contemplating whether i should paint the air ducts same color as car or some type of silver color for contrast?
 
  #64  
Old 09-13-2011 | 03:50 PM
jimmyboi860's Avatar
Registered User
iTrader: (3)
Joined: Aug 2010
Posts: 830
Likes: 45
From: Connecticut
im from CT ^
 
  #65  
Old 09-13-2011 | 08:11 PM
NFSP G35's Avatar
? = 2B || !2B
iTrader: (22)
Joined: Apr 2009
Posts: 22,160
Likes: 852
From: Tallahassee, FL (or thereabout)
Premier Member
Ducts black, always.
 
  #66  
Old 09-14-2011 | 03:06 PM
iratemetsfan04x's Avatar
Registered User
iTrader: (1)
Joined: Apr 2010
Posts: 51
Likes: 1
From: CT
Originally Posted by jimmyboi860
im from CT ^
yeah last year we had a brutal winter! hopefully its not that bad this year.
 
  #67  
Old 09-01-2013 | 09:33 PM
Hai_Rolla's Avatar
Registered User
iTrader: (1)
Joined: Jun 2013
Posts: 13
Likes: 0
From: Broken Arrow, OK
Its been awhile.. but I just got one and here's how it turned out..

Front 9/10 fitment
Sides 9.5/10 fitment
Rear 6.5/10 fitment



 
  #68  
Old 09-02-2013 | 03:23 AM
Blue Dream's Avatar
I drove ttrank's car solo
iTrader: (50)
Joined: Mar 2009
Posts: 18,299
Likes: 1,487
From: By the sea, Tx
G35 sedan w/ too much money in mods
Premier Member
Looks pretty good, it appears you had an issue up front where the bumper sits under the driver side headlight.
 
  #69  
Old 09-29-2013 | 11:53 AM
Herbbie Hablib's Avatar
Registered User
iTrader: (4)
Joined: May 2011
Posts: 418
Likes: 34
From: Murica
Thanks for the review guys, Ive been looking for some OEM Nismo sides looks like these are the next best thing.
 
  #70  
Old 09-29-2013 | 11:39 PM
North NJ G's Avatar
Registered User
iTrader: (11)
Joined: Mar 2012
Posts: 314
Likes: 9
From: North Jersey
Originally Posted by Hai_Rolla
Front 9/10 fitment
Sides 9.5/10 fitment
Rear 6.5/10 fitment




Fitment on the front bumper looks pretty good. I bought a vis front a few months back, even though i know it would not fit the 05-06. Figured id try and have my body shop make it work with negative results. The bumper felt pretty cheap and was almost breaking as it was being handled. If a poly nismo front for 05-06 ever drops, i'm all over it. I run the hd right now.
 
  #71  
Old 01-21-2014 | 01:13 AM
Hai_Rolla's Avatar
Registered User
iTrader: (1)
Joined: Jun 2013
Posts: 13
Likes: 0
From: Broken Arrow, OK
Originally Posted by Blue Dream
Looks pretty good, it appears you had an issue up front where the bumper sits under the driver side headlight.
Yes, well that was because some idiot went straight in a left turn only lane and hit my front driver side. Wiped the bumper but wasn't bad enough to replace fender but had to straighten and touched up best I could before it rusted.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jusseth
G35 Sedan V35 2003-06
16
09-13-2020 01:25 PM
poktanG35
Engine - Exhaust
23
10-26-2015 04:32 AM
yoyoyo8
Exterior - Body Parts
1
08-12-2015 04:04 AM
Kz_Ed
Exterior - Body Parts
8
07-23-2015 03:41 AM
G35_EAZY
Exterior - Body Parts
0
07-19-2015 02:38 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 10:07 PM.