i actually just came back to say i found out the front markers arent supposed to blink so my pass. side is all set, thank u...

No i dont have led lights this is all stock..i flipped the bulb both ways and tried the pass connector and bulb on that side also..didnt make a difference

 

^Odd... I'm 99% sure they're on the same fuse.

Is it a wiring/corrosion issue?

 

all figured out..the bulb in the headlight was just blown and the ground wire for the marker was sliced in half, had to cut the wire loom back a little bit and trace it and found that, soldered it back together, taped everything back up and good to go..all bulbs fixed..I beleive i will do that mod to make the marker blink that is odd that it doesnt, seems like a safety issue..

thanks

 

definitely helps to have. i like it with my bump style markers. sticks out a little so oncomers can see it

 

I just picked up a set of Hotchkis sway bars for my 06 sedan 6mt, im running full stiff upfront and middle hole on the rear, how is this setup? what are you guys running and why? It feels good on the test drive but havent pushed it too hard yet.

 

Im pretty sure most people like either a softer setting up front than the rear or both equal. Like MED/MED

Here is a sway bar thread. It's a pretty good read, I read through it last night.

https://g35driver.com/forums/brakes-...r-summary.html

 

can someone help me find the best price for struts on my 2003 sedan oem sport tuned suspension I keep getting confused with the regular ones

 

What size extension is needed to run a 350z mid pipe on a sedan, also what sites sell them

 

8'' and mynismo.com

 

^ Wrong its 6"

Just get an exhaust shop to do it for you

 

same thing

 

^Exactly.

Apart from the 2" difference, it's pretty much exactly the same thing.




Although, the 03/04 non-nismo and 05/06 have significantly different needs as far as exhaust length goes.
It wouldn't surprise me if a 6" worked better on an 03/04 and an 8" worked better on an 05/06

 

Really? The Y-pipe and middys are the exact same length since they are the same and interchangeable respectively. Are the OEM mufflers different lengths?

 

What needs to be done in order to place a 05+ g35 coupe auto transmission in my 03 coupe?

 

^Yeah.
Or at-least the tips are different.

My 03/04 was fine when I had the stock bumper, but they were hellatucked on the 05/06, but the Borla (which came off an 05) sits absolutely perfect.
If I still had the 03/04 bumper with no Nismo lip, it would poke out and look funny.


Not to shoot you down... but give up on that idea. It'll be a crapload of work.
They changed the transmission computer completely around 04.5, and I seriously doubt the 03 ECU would jive with it, especially if it's the really old gray connector ECU.